• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

5 Ton Batteries are dead!!!! Can I.....

rumplecat

Well-known member
Steel Soldiers Supporter
2,037
221
63
Location
North West Arkansas
Can I use two spare batteries with a cross over to 24 volts and run jumper cables to the in-truck two batteries to jump it off? Right now the two in-truck batteries will only make the stater go CLunk, Clunk. I would slave it off but my other running truck is 40 miles away. I don't want to screw up my starter.
Thanks,
James G.
 

steelsoldiers

Administrator
Staff member
Administrator
5,259
3,975
113
Location
Charleston, WV
Yep, if your extra batts are charged up good, you could wire them in series and put the jumpers on them and your in truck batts where the slave wires bolt up.. Don't see how that is any different than using a slave cable so you should be fine.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks