5-ton parts available

[TaylorTradingCo]

I just got in a couple of 5-ton M-817 dump trucks that I m going to be parting out. Let me know if you need any 5-ton parts.

I have just about everything, radiators, axles, starters, alternators... I will be totally parting two of these out, so if there is any small thing you want, don't be afraid to ask. I am going to strip everything of value and then cut up everything else and scrap it. I don't have room to store big things that don't work.

I just got them in today and haven't had time to check and see if the motorsa are any good or not.

Derek Taylor
423-255-6509

 

[muddog]

How about the pto shaft for a winch that will work on my 818?

 

[grounded]

Looking for a good radiator, and also a LDS engine if one has one.

what about any good 1100 tires on rims? or decent ones.

 

[M813A1]

I could use a Cummins Muffler and ignition switch and 3 lever light switch !! Thanks

 

[M813A1]

How much for 1 running 817 ??

 

[TedG]

I am looking for a winch pto shaft also...

 

[rwelker]

looking for the pto. Need price and if you have shipping price to Central PA. Thanks, Rick

 

[gimpyrobb]

Any NEW 100x20s?

 

[FreightTrain]

you gonna be around next saturday?Not this one.The 14th.I might come up and grab some needed parts.

 

[98hd]

Do any have an M809 correct heater kit?

Could also use a control box, and depending on what you do with the motors, I need to replace one of the large oil lines that run from the Pan to (I think) the cooler.

 

[grounded]

Should add anyone needing parts up north. besides the rally coming up. ill also be down there this month to pick up a trailer for another member while im down there. so i can haul some stuff back for ya if need be.

 

[Sephirothq]

do yo have the correct m809 heater brackets that go under the hood? I don't need the heater box, just the two frame brackets and the plate that the heater box sits on.

 

[powersmoke18]

how about the pto and dump body hydraulic pump?? i could use both!!!! maybe to power my dump bed???

 

[FreightTrain]

What parts are the same on a M817 and a M543A2?

 

[jwaller]

I need a set of good horns and 3 wiper motors with brackets.

 

[TaylorTradingCo]

These trucks did not come with winches, but one of them did have 10 driveshafts in the bed. I have not had time to figure out what they fit yet. I will look into it tomorrow.

Derek Taylor

 

[TaylorTradingCo]

Gimpy,

No new tires, very few tires at all actually. Five regular ones and six giant ones (four of which were busted up), but at least I got the big rims.

BTW, I will be going to Orlando in a few weeks to the FL rally and can bring anything down for free.

Derek Taylor

 

[TaylorTradingCo]

I had presold two of the heater kits. There is a third, but I need to check to make sure it is all there. If it is I will let you have it for $150. That includes all ducts, cables, hoses, valves...

Tell me what the control box is and where it is located and I will see if it has one. Buy that other stuff and I will give you the oil line you need.

Derek Taylor

Do any have an M809 correct heater kit?

Could also use a control box, and depending on what you do with the motors, I need to replace one of the large oil lines that run from the Pan to (I think) the cooler.

 

[TaylorTradingCo]

I am selling the mounting hardware with the heaters.

Derek Taylor

 

[TaylorTradingCo]

I will have to test them to make sure they work, but I should be able to supply all of that for $75.

Derek Taylor