5-ton power steering pump

[benand117]

Does this look like the right pump to you guys? It's a vickers, the number is VTM-42-50-45-15-MF-L1-14-S4. Seems to be the same number most the other guys are running. But is there supposed to be a gear on the end? i know i need the adapter. What do you guys think?

 

[simp5782]

Picture of mine.

 

[benand117]

Well in the listing it says it's the same as the 5 ton pump. But those two don't really look the same do they.

 

[derby]

The shaft and bearing housing look too long. The one simp5782 has in his photo is the correct pump for a Multi engine. You may be able to mount a pulley on it and fab a bracket for a belt drive?
I have found that alot of pumps have similar model numbers with a different suffix. And that can be the rotation, mounting flange, GPM or shaft configuration.

 

[simp5782]

Or call TGR performance in Texas. They can make a power steering pump, small with alot of pressure and flow with remote tank for pretty cheap.

 

[benand117]

That's the thing I found a break down of vickers pump numbers and that pump has the same gpm working pressure relief pressure rotation and shaft as the ones everyone else is using. And it's only $150. Also I need to mount it on the injection pump because I'm running out of under hood room. I already have a belt drivin pump with an electric clutch mounted. But that runs the dump bed and the winch. I need the gear driven one for power steering.

 

[Jeepjake]

pump gear and adapter housing

TNJ Murray also has gears and housing adapters that you can bolt the vickers pump to, I believe it is a standard bolt flange. As far as the pump specification I can not confirm. but you might look here , it is a great thread for a power steering conversion on the deuce with some info on the 5-ton pump.

cheers
Jeep

 

[gringeltaube]

Does this look like the right pump to you guys?
It's a vickers, the number is VTM-42-50-45-15-MF-L1-14-S4. .......

That IS the correct pump! (I have one that I purchased from the same seller.)

But is there supposed to be a gear on the end?

If you want to mount it to the Multifuel, YES, you'll need the gear, here: http://www.steelsoldiers.com/deuce-...f-power-steering-pump-m35a2-8.html#post959341; also the washer & nut and the adapter housing, of course.

G.

 

[gimpyrobb]

I got one too, glad I kept the gear and adapter off my busted one. Someone needs to find a stash of these gears and mounts!

 

[benand117]

So this is pretty much all i need?

 

[benand117]

Gringeltaube why are you such a wealth of knowledge when it comes to hydraulic systems?

 

[gimpyrobb]

That gear is the same, but the adapter looks different. May I ask where you found them?

 

[gringeltaube]

Gimpy and benand117: that IS the correct one.... compare to picture below.

Also, part#10935246-1 and description, here: 2530-00-485-9554, 004859554, 10935246-1, 2530004859554 Official Source


G.

 

[benand117]

The gear and the adapter are on tmj's site. Gear $90.00. Adapter $48.00.