Well this idea is becoming a reality. I got another deuce to bob, I decided to leave my first one stock, I have become too attached to it as is to cut up. I picked up a set of 5 Tons this weekend. I have all the parts for this project, now I just need to put them together. I'm bobbing this truck and going with a M105 bed. I have a set of 16R20 XZL's, 20 stud beadlock combat rims, power steering setup from a 5 Ton, 5 Ton axles, and a section of 5 Ton and 2.5 Ton frame to stack under the stock one for lift. I'm using the 5 Ton section under the front for 9" of lift and the 2.5 Ton section under the rear for 8" of lift. I have a set of 5 Ton springs and hangers I may use under the front, but haven't decided if I'm gonna use them or not. I don't want to make it a lot stiffer than it already is. So far I got the beds switched out to see how much I need to cut off the frame. Next I need to go through the 5 Ton axles and make sure they aren't all screwed up inside or something. I got a bunch of work ahead of me, but I will try and keep updates posted on here when I get something done to it.