Tader Head
New member
- 4
- 0
- 0
- Location
- geneseo ny
Can't seem to lock my front axle in all the time . can some one help this old gasser?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
56 reo front axle sprag
- Thread starter Tader Head
- Start date
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Sure it is adjusted right?
bulldog_mack13
3/3 ACR
- 2,968
- 34
- 0
- Location
- Colo Springs, CO
Your front axle only works when your rear tires slip. Do you have a tree near you that you cant pull down with your truck? Tie your Deuce off to the tree , have someone watch the wheels and start to move , have them watch to see if the front tires start to pull. Do the same in reverse.
If not then it might need to be adjusted or might not work at all. -Jay
If not then it might need to be adjusted or might not work at all. -Jay
Barrman
Well-known member
- 5,266
- 1,782
- 113
- Location
- Giddings, Texas
Keep your fingers and thumbs out of the steering wheel when you do this. The front axle engages when the rear tire achieve a 6% spin. Then, presto chango, the front tires are spinning. If the wheel is turned, one tires gets good traction or something like that. Then the steering wheel will spin in your hands. Thumbs up and pinkies down will save you.
The theory is that the front will engage before the rears start hopping around. If your rears are hoppin around and spinning with the front never even engaging. Then you need to download the pre 1965 -20 manual for the M35. It walks you through how to adjust the sprag and how to test it. The official test does not include a tree or spinning the rear tires by the way.
The theory is that the front will engage before the rears start hopping around. If your rears are hoppin around and spinning with the front never even engaging. Then you need to download the pre 1965 -20 manual for the M35. It walks you through how to adjust the sprag and how to test it. The official test does not include a tree or spinning the rear tires by the way.
bulldog_mack13
3/3 ACR
- 2,968
- 34
- 0
- Location
- Colo Springs, CO
Man I sure hope the tree isnt in the manual.
WOLFMAN1
New member
- 367
- 1
- 0
- Location
- Nunnelly, Tennessee
EVEN IF the tree is IN THE MANUAL it is good advice to try. gotta find something big enough to hold the deuce in place.
wdbtchr
New member
- 883
- 3
- 0
- Location
- St. Louis, MO
I use a steep hill out in the woods, just try to go up forward or reverse. If the front axle engages I can go up or down.
That way I don't need a second person to watch the front wheels.
That way I don't need a second person to watch the front wheels.
nk14zp
Active member
- 2,636
- 17
- 38
- Location
- Columbia Falls Maine
Just jack up the front and do it per the tm.
Tader Head
New member
- 4
- 0
- 0
- Location
- geneseo ny
were do i find information on how-to with this sprag?
Last edited:
waayfast
Active member
- 814
- 106
- 43
- Location
- Lake Fork,Idaho
First, welcome to the site!When the guys speak of the "TM,s", they mean the technical manuals. Lucky for you(all of us
) the site has provided for free the TM,s.
Look at the top of the page --find and click on "resources",second line down--Tech Manuals.
Happy reading and enjoy!
JIm
) the site has provided for free the TM,s.Look at the top of the page --find and click on "resources",second line down--Tech Manuals.
Happy reading and enjoy!
JIm
Barrman
Well-known member
- 5,266
- 1,782
- 113
- Location
- Giddings, Texas
The manual ending in -20 for the M44 series trucks is the one that explains transfercase adjustment.
Tader Head
New member
- 4
- 0
- 0
- Location
- geneseo ny
cant seem to find the right manual for the sprag adjustment. can someone help? 1956 2 1/2 ton 6x6 gasser.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
1965, it's under the resources section.