• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

7 ton MTVR Parts Reference Spreadsheet

Elijah95

Certified Rookie
1,239
1,197
113
Location
Georgia
Any leads on the "O" rings for the 21 inch wheels? Part number, NSN, source, availability, etc.
These trucks run 20” wheels, same part number o rings as Hemtt wheels

I normally order mine from ken spencer



Sent from my iPhone using Tapatalk
 

Camoguy

Active member
102
63
28
Location
Oxford nc

Camoguy

Active member
102
63
28
Location
Oxford nc
All seals and O-rings

I have contacted OVL. I can order all seals O-rings etc to rebuild passenger and driver side front wheel axle hub. However there is one problem with one seal they have a minimum order of 100. I believe if those of us who needed them would give them a call asap they would see the value in stocking A variety of parts for these trucks. All the other seals and O-rings that I need they have in stock and will sell one and two at a time. Long story short I think it was $350 to get everything I needed. Not bad my opinion for new parts. FYI that quote also included a water bottle and pump.

If your like me when it comes to degradable parts like seals etc. I prefer NEW over aged surplus thats been dry rotting on a shelf somewhere.
 
Last edited:

Camoguy

Active member
102
63
28
Location
Oxford nc
I would like to add. That they are very helpful at narrowing down what I need. The diagrams that I was sent will be a big aid in the teardown rebuild also. There aren't any part numbers on them but still a good picture of what your getting into.
 

MAdams

Active member
380
132
43
Location
San Dimas, CA
What seals are you referring to? The wheel only has one seal, the big o ring that goes between the rim halfs. Are you talking about the ctis wheel valves, the hub seals?

Sent from my SM-G975U using Tapatalk
 

Camoguy

Active member
102
63
28
Location
Oxford nc
What seals are you referring to? The wheel only has one seal, the big o ring that goes between the rim halfs. Are you talking about the ctis wheel valves, the hub seals?

Sent from my SM-G975U using Tapatalk
Sorry poor choice of terms on my part. I was referring to the hub/axle and CTIS seals.
Total of 4 seals and an o-ring for each
 
Last edited:

4x4nutz

Active member
Steel Soldiers Supporter
283
117
43
Location
Mico, Texas
Can anyone recognize what exactly this is? I bought a load of Humvee parts and this 250 pound box came with it...Not humvee parts... here's a couple pics...IMG-3324.jpgIMG-3326.jpgIMG-3325.jpg
 

smody

New member
2
1
3
Location
kentucky
I've also got a long list of cab components with an exploded diagram, for the Pierce Hawk Extreme. Pierce is a division of Oshkosh, and sells rebadged Oshkosh vehicles to civilian fire departments. The "Hawk Extreme" is a rebadged MTVR. Let me know if you guys want it...
I’d like to see that if possible. Thanks
 

DirtyDirk

New member
29
16
3
Location
Colorado
I've also got a long list of cab components with an exploded diagram, for the Pierce Hawk Extreme. Pierce is a division of Oshkosh, and sells rebadged Oshkosh vehicles to civilian fire departments. The "Hawk Extreme" is a rebadged MTVR. Let me know if you guys want it...
I would love a copy of this exploded parts cab diagram. I am about to embark on a cab rebuild
 

JW7tonWY

Active member
104
144
43
Location
Central Wyoming
I've also got a long list of cab components with an exploded diagram, for the Pierce Hawk Extreme. Pierce is a division of Oshkosh, and sells rebadged Oshkosh vehicles to civilian fire departments. The "Hawk Extreme" is a rebadged MTVR. Let me know if you guys want it...
If you are sharing I would love a copy too.
 

JW7tonWY

Active member
104
144
43
Location
Central Wyoming
I have just replaced my turn signal switch, I ordered it thru ATAP, When I received it did a little research the part is made by TRW Screen shot below is the same part if anyone else is looking for it.

Currently on ebay, the direct from oshkosh part was only $30-50 more so not saving much. I have the 2002 MK23, not sure if the AMK's used anything different . link below. chrome_KtKCAyfZwt.png
 

JW7tonWY

Active member
104
144
43
Location
Central Wyoming
Has any one done any repairs on the AC unit? One of my switches, blew thru its center pressure from the AC, Believe High side and is now open circuit. When I started testing I found the leak coming our around the terminals and in the spot in the middle. Our of the try anything mode of trouble shooting I tightened the body to the fitting and the leaking stopped but circuit was still open. I bypassed the circuit and charged the sytem to spec pressure and it worked for testing purposes but i need the sensor. I am sure it is a standard off the shelf part I just don't have shelves like that in middle of Wyoming. arrow points to partIMG_1440.jpeg
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,125
9,385
113
Location
Mason, TN
Has any one done any repairs on the AC unit? One of my switches, blew thru its center pressure from the AC, Believe High side and is now open circuit. When I started testing I found the leak coming our around the terminals and in the spot in the middle. Our of the try anything mode of trouble shooting I tightened the body to the fitting and the leaking stopped but circuit was still open. I bypassed the circuit and charged the sytem to spec pressure and it worked for testing purposes but i need the sensor. I am sure it is a standard off the shelf part I just don't have shelves like that in middle of Wyoming. arrow points to partView attachment 902642
Part # on your switch should give you the cut out pressure.

Low and high pressure switches listed below.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks