700r4 TV cable clip?

[Erik Unyielding]

The tranny shop texted me today looking for some kind of clip that connects the TV cable to the hook on the end of the rod in the bracket. Does anyone know if it has its own part number, where to get one, or even a picture of how it all goes together?

 

[adf5565]

It looks like you’re missing the stud on the rod to which the clip on the end of the cable attaches to. Essentially the stud on the injection pump where the rod attaches, there is a similar stud on the rear end of the rod where the cable connects. I don’t have any exact pics showing what you need but here’s some pics of what I took for my setup that kinda shows it.

 

[adf5565]

On the bracket/rod I purchased it came with that stud already installed. I believe you could just purchase this, secure it to the rod, and then attach your tv cable clip to it.

Edelbrock 8018 Edelbrock Throttle Lever Studs | Summit Racing

Free Shipping - Edelbrock Throttle Lever Studs with qualifying orders of $109. Shop Throttle Lever Studs at Summit Racing.

www.summitracing.com

 

[Erik Unyielding]

Ok, this all makes sense now, thank you. I'm trying to picture everything from memory while talking to the guy and I haven't seen the parts in a few weeks so it was hard to decipher what he was talking about.

 

[Erik Unyielding]

On the bracket/rod I purchased it came with that stud already installed. I believe you could just purchase this, secure it to the rod, and then attach your tv cable clip to it.

Edelbrock 8018 Edelbrock Throttle Lever Studs | Summit Racing

Free Shipping - Edelbrock Throttle Lever Studs with qualifying orders of $109. Shop Throttle Lever Studs at Summit Racing.

www.summitracing.com

This did the trick perfectly. I got one on Amazon yesterday and brought it by the tranny shop this morning. It clips right into the detent cable so my mechanic just needs to bend the rod a little more to fit snug around the threads. Thanks for the suggestion!

 

[adf5565]

This did the trick perfectly. I got one on Amazon yesterday and brought it by the tranny shop this morning. It clips right into the detent cable so my mechanic just needs to bend the rod a little more to fit snug around the threads. Thanks for the suggestion!

No problem, glad it worked!

 

[richfoub]

It looks like you’re missing the stud on the rod to which the clip on the end of the cable attaches to. Essentially the stud on the injection pump where the rod attaches, there is a similar stud on the rear end of the rod where the cable connects. I don’t have any exact pics showing what you need but here’s some pics of what I took for my setup that kinda shows it.

Hi, what do you call the small brass piece with the screw in it that clamps onto the cable?

 

[adf5565]

Hi, what do you call the small brass piece with the screw in it that clamps onto the cable?

The throttle lever stud? I don’t think it’s brass but I think that’s what you’re referring to. I linked one from summit in this thread if so.