• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

8.3 injector cleaning or replacement

MAdams

Active member
380
127
43
Location
San Dimas, CA
I went on a 400mile round trip this weekend to Pismo Beach, CA. The truck ran awesome and did great in the sand, M931a2 with a M105 trailer. At idle there is a grey haze and the EGT's are really high at 1000 degrees just cruising 55mph on a flat freeway. I want to try to clean my injectors but wondered if its better to just replace them because they are pretty cheap.

Anyone had luck with cleaning them? I pulled the #1 injector and there is some build up on the tip but the holes look clean.
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,518
2,698
113
Location
Monrovia, Ca.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks