818 toolbox

[armadillofz1]

found a great case to bolt to the cat walk of the 818. has 2 massive doors that pivot down and 3 smaller panels that open on the other sides. about 2'x4'x4'. fits on the 818 like it was made for it. too good a secret to keep quiet.

*edit* i guess i'm to intelligent to figure out how to add a photo

 

[R Racing]

Looks like a nice box for a M101 or M105 or pickup as well !

 

[Derrickl112]

the question is...can you still pull a trailer with that on it?

 

[cessnatwin]

I cannot see how a trailer cold turn!

 

[Hammer]

Yeah, no way to pull a trailer with that there.
My flatbed gets close enough with the stock setup!

 

[armadillofz1]

trailer? 105 is all i need, anything else puts you into CDL land and thats nicht gut.

 

[Preacherboy]

So what is the case and where would we get it and how much does it cost?

How did you attach it and can we see pictures of the inside?

 

[M813rc]

Armadillo, when you post scroll down to "Additional Options", then look for "Attach Files" and click the "Manage Attachments" button.

That brings up a separate "Manage Attachments"screen, hit the first "Browse" button, select the photo from your files (as far as I know, you have to have it saved in your computer, happy to be corrected if I'm wrong).

Once you have selected the picture, hit "Upload" and it will take the picture, automatically resize as necessary (unless the original is huge) and it will move from box 1 to box 3 "Current Attachments".
In this case, your picture resized from 296kb to 96.9kb.

When you hit your "Submit Reply" button it should all post up.

Clear as mud??

Now, if I did this all right your picture should be below.

Cheers

.

 

[armadillofz1]

Ahh. Thanks. My phone won't let me do that. I'll try
It next time I'm on a computer.

Krall here on SS has them. They are aluminum and very well made. I'm going to make it quick release with 4 Wingnuts In case I want to pull a bigger trailer.