900 Series Tire Question

[rcb]

Greetings !!
Won a 900 Series A2 with flat tires, no batteries and parts missing.
Question... so I don't damage the tires, how do you inflate the tires
for hauling the truck up on a flatbed ? Without seeing the truck in
person, isn't the inflation system sealed or can you still air-up at each
wheel ?
Thanks...
Bob

 

[M35A2-AZ]

You can air up each tire if they put the valve on the wheels right.
We just pickup a M925A2 and we could not get air in one of the tires.
As it turns out they left a valve core in the tire when they put the CTIS valve on it.
So you could not let air out or put air in.

Good luck with your truck.

 

[tractors0130]

You can air them up at each wheel (on CTIS regulator) provided there are not large holes in the tires, good luck.

 

[jcappeljr]

You can air up the tires seperatley.Is this the truck in Aberdeen.

 

[Doubled]

If they don't hold air

If your tires won't hold air and you need to replace the O-Rings in the wheels I can refer you to a couple suppliers.

 

[Doubled]

Parts?

I'm considering parting out a M931A1 that I picked up that has a bad motor. Email me if there's any major components you need.

david@doubledstrucks.com

 

[KsM715]

Are the flat tires on the front? If so I would be very weary of using those tires there. GL will not air up the tires when they move trucks around the lot and often the tires are already shot.

 

[M35A2-AZ]

Here is somes pics for my M931A1 we picked up that had a flat front tire.
We aired it up and drive it home. I will not do that again!!!
It was a new tire also.