- 4,038
- 119
- 63
- Location
- Ponchatoula LA
ill be going this tuesday and pick up new 923a2 from pineville. ill be sure to post a report along with pics once i get back. anyone need me to preview any thing while im there
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
923A2 recovery
- Thread starter timntrucks
- Start date
- 34,012
- 1,808
- 113
- Location
- GA Mountains
I'm sure the mission will be successful Tim. You are a man of common sense with resources. Pam riding along?
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
yes she is coming and we are driving her truck full of tools . fuel and water . check it all out and drive it home. the video showed it running and says its a running truck that just needed to be jumped off. so i have 4 new batteries to install and i have the closest 3 napa stores in sight if needed. ill be stopping in at the nearest one for some new fuel filters if i have some problems on the way home. truck has 12k miles on it so im thinking not many problems
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,132
- 113
- Location
- Athens, Ga.
Good luck Tim. You guys be careful. It's going to be hot out.
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
Tim,
Best of luck and I hope everything goes smooth for you!
Take Care,
Juan
Best of luck and I hope everything goes smooth for you!
Take Care,
Juan
goldneagle
Well-known member
- 4,511
- 1,008
- 113
- Location
- Slidell, LA
Call me if you need help. I should be around Tuesday. Hope all goes smoothly.
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Okay so what's up buddy you trying to copy my motorpool? Hope you have a fun and safe recovery, if you need anything just give a shout.
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
almost 11.00 and just getting home.. they lost my truck.. not in pineville ... they found it in fort polk.. along day for sure. ill post up my story tomorrow evening after work..
Last edited:
Old Lincoln County Iron
Member
- 490
- 5
- 18
- Location
- Carrizozo, NM
Well that sucks! I recovered my second M871 trailer today from Ft Bliss, and when I got there it was missing from the line up. Oh man got pretty excited and then found it in the back of the lot. The unit that turned it in had left a bunch of scrap and trash in it, so they were nice enough to go and dump it all. So nice they didnt even put the side board kit back up. I was just happy it was there! Hope all goes well on your situation!
goldneagle
Well-known member
- 4,511
- 1,008
- 113
- Location
- Slidell, LA
WOW that sucks! Driving all those hours and coming back empty? I would make them pay for the time and fuel! Or have the truck delivered to your place!
Now where is that popcorn smiley?
opcorn:
goldneagle
Well-known member
- 4,511
- 1,008
- 113
- Location
- Slidell, LA
He might need a recovery from Ft. Hood!
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
just corrected the location. ft polk not hood. i came beck with the truck. just had to add one gallon of water. all the fluids check ok. aired up the tires and installed 4 new batteries. it was a long day of driving all over the place. the truck ran great and can do 70 mph. its missing the 2 front side racks and the comealong for the spare tires but still had the jack and some hand tools inside. some touch up paint and then put my new mich. tires on and ill be good to go. the trans shifted out fine. i had one rear brake stuck but the 3 pounder got that fixed right up. i will do some research to see about getting my new air conditoner installed along with some light and electronic upgrades to make this a easy riding confort coach
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
ill have to see if jeff has any of those missing parts.![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Yeah call me
goldneagle
Well-known member
- 4,511
- 1,008
- 113
- Location
- Slidell, LA
Got us all riled up for nothin! Could of said you brought the truck home. Guess we needed a little drama....LOL Glad you brought it home safely! Now we need some pictures.just corrected the location. ft polk not hood. i came beck with the truck. just had to add one gallon of water. all the fluids check ok. aired up the tires and installed 4 new batteries. it was a long day of driving all over the place. the truck ran great and can do 70 mph. its missing the 2 front side racks and the comealong for the spare tires but still had the jack and some hand tools inside. some touch up paint and then put my new mich. tires on and ill be good to go. the trans shifted out fine. i had one rear brake stuck but the 3 pounder got that fixed right up. i will do some research to see about getting my new air conditoner installed along with some light and electronic upgrades to make this a easy riding confort coach
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
ok finally learned how to get pics off the phone. haha
Attachments
- 2,868
- 27
- 48
- Location
- Delta, PA.
Tim,glad the truck ran good,The a2s run and drive awesome.
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
it ran great. that day i drove 525 miles. haft of that in the a2.. ill have it looking super in no time. ill get some more pics tomorrow
HanksDeuce
Well-known member
- 1,081
- 242
- 63
- Location
- Prairieville, LA
Woo whoo! nice truck, Tim!
goldneagle
Well-known member
- 4,511
- 1,008
- 113
- Location
- Slidell, LA
Spell check please...haft = half ?
Nice truck Tim. I got the parts for you from Jeff Davis. Call me...
