Iamnewatthis
New member
- 156
- 0
- 0
- Location
- Dallas, TX
Hi, heater wasn't working to well so i thought id try changing the thermostat.
When I got the housing off from where the top radiator hose goes I found no thermostat
in there.
Is this where the thermostat goes/;
Does the thermostat go in this way?;
Or this way?;
Also as you can see I have to hold it in place either way with the rubber around it, and the housing doesn't go flush with the rubber on it,
but without it, it seems to fit right in and everything is flush.
So no rubber on it like this?;
This is the Murray thermostat from oreillys.
Thanks so much, trying to finish before dark.
When I got the housing off from where the top radiator hose goes I found no thermostat
in there.
Is this where the thermostat goes/;
Does the thermostat go in this way?;
Or this way?;
Also as you can see I have to hold it in place either way with the rubber around it, and the housing doesn't go flush with the rubber on it,
but without it, it seems to fit right in and everything is flush.
So no rubber on it like this?;
This is the Murray thermostat from oreillys.
Thanks so much, trying to finish before dark.
Last edited: