• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

A nice surprise

cranetruck

Moderator
Super Moderator
Steel Soldiers Supporter
10,350
75
48
Location
Meadows of Dan, Virginia
There are two instruction tags on the front engine cover of the xm757 and from day one, I have wondered about the possibility of reproducing them, they were blank.
Today I thought they were too blank, no sign of any residue from printing. Imagine my surprise, when I unscrewed them and checked the other side, they had been installed face down by somebody a long time ago!
They are nearly perfect, see image. :)
 

Attachments

OPCOM

Moderator
Steel Soldiers Supporter
3,657
27
48
Location
Dallas, Texas
That's certainly a plus! The ability to start by towing shows that the transmission would have a rear pump, unlike modern civillian car or truck transmissions.
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
Damn, they had idiots at the depot fixing that truck. Installing the data plates face down, I can't believe it...
 

Opie

New member
612
6
0
Location
Salem, VA
This goes one step beyond "here's your sign."

If there were a truck left in an Oklahoma field with nobody to read the data plates, would they actually say anything?
 

steelsoldiers

Administrator
Staff member
Administrator
5,265
4,016
113
Location
Charleston, WV
Fantastic! Their blundering mistake protected the plates from years of UV, rain, filth, etc... that could have seriously degraded them.
 

ARMYMAN30YearsPlus

In Memorial
In Memorial
3,585
7
0
Location
Parkville, MD
Is it possible the boot is on upside down and that one guy fastened them expecting the rubber to be cut out to show them on the other side and then some other guy installed the boot without regard to what he thought the plates were? At any point the good deal is your gain very nice to find them and not leave them there to sit useless.
 

cranetruck

Moderator
Super Moderator
Steel Soldiers Supporter
10,350
75
48
Location
Meadows of Dan, Virginia
Chuck, actually we removed all drive shafts except the one between the transfer and transmission to keep the tires from "fighting". The rear one gave us a bit of trouble since it was frozen and only wiggling the bogie made it come loose (see avatar). The rearmost axle was also lifted and chained up to make it easier to turn with the steering frozen as well.

I presented the question about the face down instruction tags to the people on the Pershing missile group (yahoo), who actually drove these trucks and the best answer so far was... "because of spy satellites". :)
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks