Aberdeen parts lists

[maddawg308]

Thought I would start a thread on the parts we are all bringing to Aberdeen to trade/sell, like we have done in the past. Be sure to post FOR SALE, FOR TRADE, and WTB/WTT as well.

Under a week people! We're getting so close I can smell Cabell's barbeque!

 

[scooter01922]

Looks like i'll have the 939 PTO, a pile of 5 ton injectors,a couple hummer alternators and a deuce full of randon stuff TBD as i personally haven't even seen a lot of it yet.

 

[lebel1886]

Stuff for Aberdeen

I waited to long, but if I can get a space, or half space I am bringing HMMWV rifle mounting kits, hand throttle kits, rear coil springs, serpentine belts, and strainer elements. And a ton of other stuff!

 

[jcappeljr]

WTB=4 1600x20 tires on 5 ton rims,5 ton master cylinder,whiffle tree and towbar for wrecker WTS=deuce hood,5 ton pto,duece bed with troop seats,10 goodyear mud and snow tires mounted on deuce rims 95% tread,M813 and M818 and M35,all trucks were just painted.Everything is located 20 minutes north of Aberdeen.

 

[jcappeljr]

Also have a M109 for sale,WTB a heater kit for a deuce and or a 5 ton. THANKS.

 

[nickd]

I need TOW stuff. i have the mounts I need the Hard to get stuff for a static display.

 

[Recovry4x4]

Scooter, are those injectors from a NHC250 or Multifuel? New or takeouts? Need some for a multifuel.

 

[atankersdad]

Dave F 's sons & I will have an ammo trailer, tons of radios (2 meter Icoms mobiles and hand helds) solatgizers, uniforms, military batteries, TA 50, vests, holsters, web gear. Looks like Sunny Surplus. I also have a MEP-003 (low hours) that is serviced and will sell at the end of the show since my sons will be using it for them and anyone else who needs power. Also if any one wnats to buy a M1008 that runs let us know. Too much to move. I also have a sindled out M35A2C Drop Side, Tan, new radials, new cargo Cover, windshield Washers, Whilser depot rebuild that I will be sell. This is one very clean truck and rides great on the 11x20 radials. Also have a bobbed M35A2, Soft top, whisler, that will be for sale. Just completed.

 

[No.2Diesel]

Hi,

We'll be there with the M923 for sale as well as:

-Assorted M939 parts
-Assorted Deuce Parts
-Plastic Battery Boxes
-800 series brake drums, shoes, hubs, new wheel cyls. etc.

See you guys there!

 

[Chow717]

WTB: 2.5t master cylinder or rebuild kit, jerry can (usable condition), airpack rebuild

 

[JeepMan]

Where did I go wrong??
I posted a 5-ton truck up here in upstate NY for sale
for a very good price with no EUC needed and it got deleted.
This post is aboiut stuff for sale.
Where did I go wrong??

 

[123mack]

I'll be bringing a 24v genset and a STE/ICE.

 

[Crazyguypa]

For Sale:

- HMMWV seat frames (NOS) - 2
- HMMWV transfer case
- MKT M59 field ovens w/ 10gal & 15 gal pots and lids, deep pan w/ lid, and most of the utensils.
- Winter kit (NOS) - Hood and side panel blankets for a M135 or M211
- 5 ton spare tire clamp (drop down piece) (NOS) - 2
- radio mount (MT-1029) and bracket setup for cucv - has cables and crossover piece installed (vic-3 possibly?)
- aluminum storage boxes - looks to be used for rack mounted radio components, but you can rip out the guts and its a nice air tight box.
- Hydraulic ram - its big, would be good for modifying a M105 or M101 to dump
- Spark arrestor kits (NOS) for 10kw generators - 2
- Fuel metering pumps for 30kw generators


Looking for:
- complete winch setup for M35, that won't break the bank.
- M2HB for my gun ring setup (non firing or a replica)
- Cab reinforcement plate - if not going to place an order w/ Dabtl next weekend.
- Power cord from batteries to MX-7777 (Carnac has one waiting for me)

 

[ZiggyO]

Hello all,


I plan to have a ton of random stuff at the show for sale..... some notables are

amber headlight bulbs (only 3 sets left)
clear headlight bulbs (about 15 sets)
crank up landing gears for the m105 and similar trailers (bringing 4)
deuce lug wrenches and breaker bar handles
fire extinguishers (all types)
road triangle kits
deuce and cucv shackles and pins
set of 10ea 9.00x20 tires (75%+ tread)
one lot of two 50's era tent stoves with a large amount of chimney piping
6ea scepter fuel cans
fuel can holders (bringing at least 6)
several deuce and cucv jacks
wheel chocks
heaps of radio cables and related bits
boarding ladders (5ea. assorted types)
possibly a few deuce, 3/4 ton, and 1 1/2 ton covers (if I dig them out in time)
deuce cab covers (2ea)
lots of small stuff as well............



Feel free to stop in and chat--- I am in the yellow section, spaces P/Q 11...........

Ziggy

 

[powerhouseduece]

hmm... Ill have a 6"bds lift kit for a m1009 thats brand new and ill have 2 sets of BDS leveling springs for the m1008-9. If anyone needs any lift kits or axle gears, bearing kits or anything along that lines ill have to see what I can do.

Atankersdad already covered what we will have, any one want to buy a freshly painted bobbed m35a2?

 

[YankeeDuece]

If any body is interested I can bring TS/TT:
2- M35A3 wheels
2- M1008 Troopseats (VG metal/bad wood) throw-in canopy frame (seized)
1-complete out-of-box m35 heaterkit
10-M35 manuals

PM me, let me know.

 

[Jakelc15]

I should have for sale or trade:
• 2 new 9:00-20 ndcc's on deuce rims (not sure if the rims are new or refinished).
• 1 M105 axle assembly
• 1 M105 landng gear (single wheel type)
• 10 used 9:00-20 ndcc tires (going to be very cheap)
• 1 maybe 2 FREE steel 55 gal drums. doesn't leak and 1 with a crack in the fill neck.

Wanted: Pending how much moola the wife wants to give up!
• Boarding ladder for Deuce
• A New battery box for deuce
• A set of deuce tail lights
• Cheap deuce transfer case to take synchronizer out of.
• Springer seat cover set
• M105 parking brake handles

 

[powerhouseduece]

• Cheap deuce transfer case to take synchronizer out of.

got one at my house, im not taking it to aberdeen, you can drive over and get it

 

[tbanks]

Aberdeen parts

Parts Im bringing,mention your a SS member and I will try to cut you some slack if I can.
8 VIC 1 kits complete and tested
20 NOS hydrovac rebuild kits
M23 50 cal cradles
M2 chicken shields
M60 shields
Humvee GPK shields
Take out guages M series
AS 3900 antenna sets
AS3916 sets MX6707 sets
A bunch of VRC 12 STUFF
AND anything else we have room for.

 

[maddawg308]

I will be bringing the following items for sale (not including items that have already been purchased by Steel Soldiers and I'm bringing for them):

2 M38 jeep rims
4 M37 rims
1 heavy tow bar
about 30 short heavy tow bars
3 medium tow bars
about 60 5-lb. military fire extinguishers
2 4-inch shop vises, need work
2 complete exhaust stacks for deuce
pair of deuce rear bumperettes
1 4-step steel boarding ladder
3 rolls of commo wire
1 TOW weapon pedestal
about 15 Federal Siren Model X 24-volt sirens
pile of MEP-003 genset parts
pile of misc. deuce parts
bench passenger seat for deuce
120-volt power supply for RT-524
pile of misc. military radio parts and access.
about 100 mixed handsets and radio cables
small lot of military books and publications
3 turn signal housings, metal housing
40 IV bag hangers for ambulances
complete West Coast mirror assy.
junker deuce winch (busted housing, good for parts)
huge collection of inert ammo, 50 cal through 40mm
5 Rausch Creek rally Steel Soldier Tshirts
many MANY other parts

wanted:
M35 manuals
GMA camo soft top (vinyl) for cab
VIC-3 cables
components for any radios of the following type: GRR-5, GRC-193, GRC-213, PRC-104, GRC-206
new data plates for M35A2
wrecker chain

I will be set up in Yellow S12/R12, be good to meet you, stop on by!