aztec
Member
- 94
- 0
- 6
- Location
- dunnellon florida
ABS scan tool Haldex info center where can i get one
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
ABS Haldex info center scan tool
- Thread starter aztec
- Start date
- 6,860
- 693
- 113
- Location
- Stratford/Connecticut
They pop up in the bay here and there. Usually the abs module is bad and it blows one of the fuses under the dash by the steering column. If you replace the fuse and it blows again the module over the back axle is shorted.
aztec
Member
- 94
- 0
- 6
- Location
- dunnellon florida
The ecu is new no blown fuses light stays on it was working it just came on while driving
- 6,860
- 693
- 113
- Location
- Stratford/Connecticut
Did you check the trucks voltage with a meter? It could just be a stored code it may clear itself in time.
- 5,605
- 2,898
- 113
- Location
- Metairie/La (N'awlins)
I have one I would consider renting with a security deposit.
Shoot me a pm with offer if interested?
Shoot me a pm with offer if interested?
aztec
Member
- 94
- 0
- 6
- Location
- dunnellon florida
Thanks to all its working now why i dont know
Punisher666
New member
- 55
- 0
- 0
- Location
- Kirkville, NY
I'm having the same issue,the ABS light just stayed on last night when I fired the truck. Everything is in order and tight on the ABS unit itself but still the light stays on after the system self check. I checked for the TM for the truck but it jumps all over the place and isn't really direct to what the underlying cause may be. Any insight would be greatly appreciated.