As I was told to “stop it”, I am going to stick to regular diesel, but has anyone got experience with boosting compression ration mixing in non combustible synthetic turbine oil? It gave quite a hill climb ability to the old NHC250 although it almost hydrolocked it at 3 quarts of turbine oil per 10 gals fuel for a 14 liter engine. Coolant leaked a bit from the water pump too.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Accidental boost with NHC250?
- Thread starter Micmada
- Start date
Crf450x
Well-known member
- 275
- 350
- 63
- Location
- Fall Branch, TN
Admittedly, I know absolutely nothing about turbine oil. You’re saying it won’t burn? I’m gonna say it’s EXTREMELY unlikely, even if it separates itself from the fuel and doesn’t burn, that it would raise compression any appreciable amount and borderline impossible for that to cause a hydro lock.
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
There are all kinds of "wives tales" about fuel additives. Some work great, some occupy space, and a few are a complete waste.
Personally I know nothing about Turbine Oil.
I have a container trailer driver friend who is an independent. His truck. His maintenance.
ANYHOW, he is firmly convinced that a gallon of gas in each tank at every fill up.
He runs the wheels off the thing. That is his "additive" of choice...
It just behaved weird. I seemed to have no need to push the pedal on the usual bridge climb where my truck feels sluggish. When I shut the engine to go to a store first, it barely turned over upon restart. I then went to a gas station to put some diesel to dilute the mix thinking I should have left the engine running while filling because when I restarted the engine it barely turned over. It cranked a quarter turn and stopped, and when I let go of the starter it actually went over and started. It was very bizare. Now she is running normal.
the turbine oil was surplus stuff the air force uses in C130s. They were dumping the stuff because it was too old and I picked it up thinking it would be ok fuel just like some people use Marvel or motor oil in their trucks. I will have to look up the type.
Last edited:
That was this Royco oil. https://www.145.aero/royco-560-case-of-24-qt-p/royco560-cs.htm
Use at own fun risk in engine, is all I can say.
I would think gas is rough on seals and injectors, even a bit of it, and gas is too volatile for hot applications. I heard Xylene can be used as cetane improver, but the regular cetane improver bought from the store (I forgot the compound name but abbreviated 2EHN) is better on the injectors. Xylene is used in some race cars, especially in Australia, for its high 117 octane and lower vaporization pressure (about 10 to 50 times less volatile than gas and thus prevents vapor locking in race applicaions).
Diesel fuel cetane rating and the effects
Diesel Cetane Rating I'm still seeing a large amount of people that want to continue adding cetane boosters to the 2 cycle oil this is not required. Today diesel fuel is approximately 43 - 47 cetane number. Please check over on the MSDS page. Cummins Cetane Requirements for 1st, 2nd and 3rd Gen T...
mopar1973man.com
Diesel Fuel Improvers and Their Effect on Microbial Stability of Diesel/Biodiesel Blends | Request PDF
Request PDF | Diesel Fuel Improvers and Their Effect on Microbial Stability of Diesel/Biodiesel Blends | Additives that enhance properties, such as cetane number or cold flow, are introduced in diesel-biodiesel blends in order to upgrade its... | Find, read and cite all the research you need on...
www.researchgate.net
Last edited:
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
That was this Royco oil. https://www.145.aero/royco-560-case-of-24-qt-p/royco560-cs.htm
Use at own fun risk in engine, is all I can say.
Most will know it as "23699" use in just about every thing turbine in the military.