ACTUAL HMMWV width?

[Awol]

I've wondered about this too. My trailer deck is 80" wide, and has a raised perimeter of about 3". I was thinking I could take 2"x10" boards and fill up that 3" gap around the deck, and drive up over the fenders. I don't know if the fenders will take the weight though.

MT/R's around here are $100 per tire at 90% tread!

 

[NCBPhantom]

I've wondered about this too. My trailer deck is 80" wide, and has a raised perimeter of about 3". I was thinking I could take 2"x10" boards and fill up that 3" gap around the deck, and drive up over the fenders. I don't know if the fenders will take the weight though.

MT/R's around here are $100 per tire at 90% tread!

I would like to know where I can get those inexpensive tires.

 

[juanprado]

I would like to know where I can get those inexpensive tires.

Southern Metals in Wilmington NC has like new on 12 bolt rims for $100

 

[MaverickH1]

Southern Metals in Wilmington NC has like new on 12 bolt rims for $100

Sounds like this ginger finally has a reason to go to the beach.

 

[Lionel]

Make sure you call ahead though to check inventory.

 

[Lionel]

I know they just got in 12 up armored turbos.

 

[MaverickH1]

Success! My 81.5" wide between the fenders rental trailer fit the M1123 perfectly. Low pressure in the tires allowed it to morph well enough to fit. The trailer had no sharp edges except for a weld area on the inside of the fenders, but I lubed it all up with dish soap just to be sure.

 

[NCBPhantom]

Success! My 81.5" wide between the fenders rental trailer fit the M1123 perfectly. Low pressure in the tires allowed it to morph well enough to fit. The trailer had no sharp edges except for a weld area on the inside of the fenders, but I lubed it all up with dish soap just to be sure.

View attachment 652573

Sweet. I see your tow vehicle is a Dodge. Congratulations on pick up.