Added some 3.5" flood lights for the front and also in the rear as backup lights

[MarkM]

Installed these little 3.5" Leds (1320 Lumens) to the three holes in the bumper and two as backup lights. Will be wiring them up tomorrow. Just going to use toggle switches on these lights as they are only 18W each.

Mark

 

[warcow105]

You have a link for those?



Mike

 

[MarkM]

Just do a search on a popular auction site for [FONT=&quot]2X 3.5inch 18W Round LED Work Light Flood. [/FONT]They are 10-30 volts and are under 16 bucks shipped.

[FONT=&quot]Mark

[/FONT]

 

[warcow105]

Nice, will do.


Mike

 

[Flyingvan911]

Looks good!

 

[JoeJrTheBarber]

Have them in the front bumper of my truck as well. Super bright and super cheap !

 

[ikoinu]

Like it! And good job on the antenna mount lights, great idea! I've been thinking about how to set some light on my front end because that option is no longer available due to the winch.
How's the light you put on your hood Joe, and any pics of it working?

 

[JoeJrTheBarber]

How's the light you put on your hood Joe, and any pics of it working?

Not as of yet as the truck is still in my friends shop getting buttoned up. I will post a full build log on here once its back in my possession.
As far as the hood light goes its just mounted with the two provided brackets and some grade 8 hardware to the hood itself.

Pretty sure due to placement it wont really put any light directly in front of the truck but will have to help in the dark of night to see.
I have the three round ones in the bumper and a square LED that replaced my blackout light for that...

 

[ikoinu]

Once you fire that led bar up and see the results, I am going to follow suit.
I have the same brush guard as both of you, was thinking about putting a smaller led bar on the bottom of it to light up lower (same thing as the bumper lights are doing) and throwing some cubes on the windshield hinge with an adapter.

Sorry for the thread hijack!