Mtrdrms
New member
- 88
- 3
- 0
- Location
- Torrington, CT
I just got my fuel issue figured and wouldnt you know it, I ran into a glow plug problem. This is whats happening: My relay used to click and now it doesnt. I checked the voltage at the top post and it reads 24v. I checked the coltage at the two small posts and they both read 12v. The bottom post however reads 0. So, I replaced the relay with a napa GPR109 and the same symtoms are present. What do you guys think? I thought the bottom post should get 12v?
Andy
Andy