I had searched the site before posing this question......
today I started up the deuce and went for a drive I noticed the brake pedal was a little spongey at first then it tightens up good, if it sits for about 4 or 5 min without touching the brakes it feels spongey and goes about half way down.
I checked the fluid level and its good, no leaks, and for the hell of it I bleed the lines,no air bubbles.
Is this a sign of an air pack problem? i
I had read that there is a nut on the back that can come off to lput wd40 into, But on mine there is no nut on the back
would you recomend I just take the line off the back and spray it there?
as always thanks,
Jim
today I started up the deuce and went for a drive I noticed the brake pedal was a little spongey at first then it tightens up good, if it sits for about 4 or 5 min without touching the brakes it feels spongey and goes about half way down.
I checked the fluid level and its good, no leaks, and for the hell of it I bleed the lines,no air bubbles.
Is this a sign of an air pack problem? i
I had read that there is a nut on the back that can come off to lput wd40 into, But on mine there is no nut on the back
would you recomend I just take the line off the back and spray it there?
as always thanks,
Jim