• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Alternator issue again, advise on upgrades?

k5ontherocks

New member
94
0
0
Location
INDIANA
Another update. I found a thread on here about removing a diode from inside the ABS module and so i gave it a shot. Very easy repair. I am unable to electrically explain how and why it worked, but it did! My ABS lamp is off, fuse no longer blows, ABS works flawlessly. I still have no low air and e-brake warning buzzer, assuming it was also taken out by my overcharging issue. I will report back once ive fiexd it.
 

Mike929

Member
820
22
18
Location
DFW, Tx
The removed diode was a short in its blown state. You removed the short. Next time you have a high voltage it will take out the board if a diode isn't replaced. Or at least that is my understanding.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks