ramdough
Well-known member
- 1,554
- 1,729
- 113
- Location
- Austin, Texas
Yes, pictures are required….. or no one will believe you or your truck exists.
Sent from my iPhone using Tapatalk
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Aluminum wheels
- Thread starter MIDDLEMAN
- Start date
Sent from my iPhone using Tapatalk
- 212
- 228
- 43
- Location
- Woodside CA
Road trip thread here.
Dan6x6
New member
- 7
- 5
- 3
- Location
- Boston, MA
Take from Forum Rules:
“New accounts are not able to start conversations with other members without 10 posts or more to the site. If you are a new member and are trying to help another member out here and have something they're looking for, you may start a conversation with me. Please include the details and the other party involved. I will then start a discussion between all three of us. This is due to the scammers that have previously been using the WTB section as a target.”
“New accounts are not able to start conversations with other members without 10 posts or more to the site. If you are a new member and are trying to help another member out here and have something they're looking for, you may start a conversation with me. Please include the details and the other party involved. I will then start a discussion between all three of us. This is due to the scammers that have previously been using the WTB section as a target.”
Forum rules
General Rules SteelSoldiers.Com Website Rules and Regulations (subject to change without notification - just like the real world ;-) ) Welcome to SteelSoldiers.Com. We strive to...
steelsoldiers.com
Dan6x6
New member
- 7
- 5
- 3
- Location
- Boston, MA
@Keith Knight is the Right Hand Thread the one we use... Little confused as to why RH and LH on your invoice... The picture clearly show RH marked on the lug nut...
Let me know if RH thread is the correct one since I'll be ordering some... Much appreciated for all your efforts here...
Dan6x6
New member
- 7
- 5
- 3
- Location
- Boston, MA
@Keith Knight never mind since I need to order 3 RH and 3LH...Got it...
- 982
- 1,838
- 93
- Location
- Wauchula, FL
Glad you figured it out
Dan6x6
New member
- 7
- 5
- 3
- Location
- Boston, MA
@Keith Knight apologies for the lack on knowledge on this one... I've ordered all the O-rings and Thank you for the details... Can you help a bit further with the piece " back side of the wheel", not sure where those O-ring goes....Tried to send you a PM but I'm new to the site and I guess I'm not yet approved to send PM....
Attachments
- 982
- 1,838
- 93
- Location
- Wauchula, FL
So on the back side of the wheel, meaning the side that mates with the brake drum there is an oring on there.
Dan6x6
New member
- 7
- 5
- 3
- Location
- Boston, MA
Alright... Now I feel little more knowledgeable and I can do this
appreciated!
- 982
- 1,838
- 93
- Location
- Wauchula, FL
I’m about to install my aluminum wheels and was wondering..,..the back of the wheel has an oring on the CTIS stud, BUT does the back of the brake drum also get a oring?
Seems like it should.
Seems like it should.
- 212
- 228
- 43
- Location
- Woodside CA
No, the O-ring on the back of the wheel and the O-ring under the CTI lug nut are all there is. My CTIS system works perfectly and I have had zero issues…knock on wood.