AMBAC M50 Rebuild Services

[screejunk]

Hoping this is the correct place for this request. Bob here from GMG. We are looking for a new partner for Ambac M50 rebuilds. If any of the experts in this community would like to discuss working with us, I'd love to talk to them. We had a direct service with Ambac, but, even Ambac, has stopped supporting rebuilds! This is a bit disconcerting But I'm sure there are some entrepreneurs out there that might have the skills to partner with us. Please message me if you would like to chat.

 

[rickf]

I know there are a couple guys here that rebuild those pumps but if Ambac has stopped support where are they going to get parts? I know timing buttons were always an issue but there are other parts that break that if not supported by replacement parts then there might be a problem.

 

[screejunk]

I know there are a couple guys here that rebuild those pumps but if Ambac has stopped support where are they going to get parts? I know timing buttons were always an issue but there are other parts that break that if not supported by replacement parts then there might be a problem.

Indeed. Many parts are available. We still sell rebuild kits, plunger guides, buttons. I believe some of the larger parts are not available. Not 100% sure what part is not available, but I have not run into a specific issue yet. Could you forward the handles of anyone who might be good to reach out to? Thanks.

 

[Light in the Dark]

MEP002A-MEP003A Ambac M50 Fuel Injection Pump 50-2/4A-80A-9540A ⋆ Green Mountain Generators

Ambac M50 Fuel Injection Pump. Specific part number is 50-2/4A-80A-9540A. For MEP002A and MEP003A units and many other applications. This does not include the small timing button that varies with each installation. These units are REMANUFACTURED to OEM specifications and fully tested. They...

greenmountaingenerators.com

I would think with that kind of margin you could just retool these in the far east new?

 

[DieselAddict]

MEP002A-MEP003A Ambac M50 Fuel Injection Pump 50-2/4A-80A-9540A ⋆ Green Mountain Generators

Ambac M50 Fuel Injection Pump. Specific part number is 50-2/4A-80A-9540A. For MEP002A and MEP003A units and many other applications. This does not include the small timing button that varies with each installation. These units are REMANUFACTURED to OEM specifications and fully tested. They...

greenmountaingenerators.com

I would think with that kind of margin you could just retool these in the far east new?

I bet CCE down under could make one from scratch and send you back some change!

 

[screejunk]

MEP002A-MEP003A Ambac M50 Fuel Injection Pump 50-2/4A-80A-9540A ⋆ Green Mountain Generators

Ambac M50 Fuel Injection Pump. Specific part number is 50-2/4A-80A-9540A. For MEP002A and MEP003A units and many other applications. This does not include the small timing button that varies with each installation. These units are REMANUFACTURED to OEM specifications and fully tested. They...

greenmountaingenerators.com

I would think with that kind of margin you could just retool these in the far east new?

Minimum run lots are over 1,000 units to get a reasonable competitive rate. Regarding our listing for a new pump. The price is what it is. I will add that we rarely rarely sell a new unit at this price, hence why we are looking for rebuild partners.

 

[Light in the Dark]

Your listing does not say new, it says " REMANUFACTURED to OEM specifications". That language isn't interchangeable.

 

[screejunk]

Your listing does not say new, it says " REMANUFACTURED to OEM specifications". That language isn't interchangeable.

Indeed, you are correct. The important thing is that our terminology is accurate on our website, where it counts. We are chatting in a forum The best quality you can get in 2024 is factory remanned, not new. Remanned being a step above rebuilding. New is not available.

 

[Light in the Dark]

The important thing is that our terminology is accurate on our website, where it counts.

 

[Light in the Dark]

I will just leave the topic alone here forth.

 

[Scoobyshep]

Well I have found myself in the same situation, The real unfortunate part is the pump is pretty much beyond repair.

 

[rickf]

Indeed. Many parts are available. We still sell rebuild kits, plunger guides, buttons. I believe some of the larger parts are not available. Not 100% sure what part is not available, but I have not run into a specific issue yet. Could you forward the handles of anyone who might be good to reach out to? Thanks.

I cannot speak for others, If they are interested they will see this and respond.

 

[rickf]

WOW! I just saw those prices!! I paid 300 and 350 for my gensets. If I had to spend that much I would scrap them out for parts and buy a decent civilian commercial unit.