Another Power Steering Question

[nattieleather]

Hi all,

Can someone tell me what is the size and length of the bolts that hold the steering gear to the bracket? I don't have a part manual -20P just a -20 so any help would be great.

Thanks,
Joe

 

[Bob H]

I assume you have the bracket.
http://test.steelsoldiers.com/upload/CUCV/TM9-2320-266-24P.pdf figure 67.1
MOPAR part# 1935737
SCREW,CAP,HEXAGON H STEERING GEAR 3
BRACKET TO FRAME 4X4

edit: not seeing a listing for the steering gear to bracket, and the diagram looks to be for a 2x4

 

[gringeltaube]

Hi all,

Can someone tell me what is the size and length of the bolts that hold the steering gear to the bracket?

4 bolts, 7/16"-14 x L= 1-3/4" (min), or x L= 2" (better)

G.

 

[Bob H]

Ok, I put my coat on and went out there.
as G said 7/16-14 x 1 3/4. 3pcs for the manual box and 4 for the power assist box with lock washers.
Not going back out to look again tonight, but I believe the box has blind holes so a 2" long may bottom out in the casting.

 

[gringeltaube]

All mounting bolt holes for all these Saginaw St-gears - manual or PS - are all thread, through-holes.


G.

 

[nattieleather]

Thanks Guys! You all Rock! BTW Bob the manual just says "SCREW,CAP,HEXAGON H STEERING GEAR 3BRACKET TO FRAME 4X4" It doesn't give the information that you all gave. To the hardware store....

Thanks
Joe