• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Antenna hole grommets

juanprado

Well-known member
Steel Soldiers Supporter
5,614
2,922
113
Location
Metairie/La (N'awlins)
There are different ones.
I have seen for one cable and a wider one for multiple. Which are you seeking?

They also use a metal flange.
 

Kenneth Cole

Active member
188
44
28
Location
Wapiti Wyoming
HI
The cables are for radios, Ham and AM/FM . I have an antenna on each rear side. I need a grommet with about a 1/2" center hole. I wasn't sure if there was a grommet that the military used.
Ken
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,582
3,490
113
Location
Brooklyn, NY
Just buy a regular grommet and drill a hole in the center. Make one out of a mold using black silicon. Use rubber that is half inch thick and cut a 3 mm large and then groove the periphery and cut a hole in the center. Use a 1/2 inch outer diameter tube and slit it down the center and place your wires through it.....
 
Last edited:

papakb

Well-known member
2,285
1,185
113
Location
San Jose, Ca

Grommets.jpg

In almost 50 years of working in industry I have consistantly found this company to be one of the most reliable to deal with. They don't have the minimum orders that prohibit you from using a lot of industrial suppliers and they're right on top of things when it comes to shipping. Their extensive catalog has almost anything you might need.
 
Last edited:

pig9r

New member
28
9
3
Location
KCMO
HI
The cables are for radios, Ham and AM/FM . I have an antenna on each rear side. I need a grommet with about a 1/2" center hole. I wasn't sure if there was a grommet that the military used.
Ken
The antenna mounts were part of the demil process on my M998. I was left with a metal plug with a hole drilled in the center for the cable. I found a replacement plug here https://www.ebay.com/itm/4-Pack-1-1-2-Metal-Hole-Plugs-Nickel-Plated-SP-1-5-NK-/282855509314

These were also used for running cables on other parts of the body. I have one on my passenger side inner rear fender. 12338085 and 12338092.
 

Attachments

Crapgame

Well-known member
635
329
63
Location
Navarre, FL
The split grommet for between the wheelhouse and the antenna mount is Part # 12338098, package of 10 NIW $16.99, out of Fayettenam, NC if you search on the streng Verbotten auction site
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks