Any Trailers Wrangler RT IIs will bolt direct to?

[rumplecat]

I have a set of Goodyear Wrangler R/T II tires, I am told they are not good for the M1008 so are there any trailer applications? I mean without a spacer to mount the tires! I have a couple of Pioneer Tool Trailers that I think run CUCV style wheels?
Any chance one of these will mount direct?

 

[gimpyrobb]

Its the rim thats the issue. Use that tire on a rim that isn't an 8 bolt, and you'll be fine.

They should be direct bolt on for an m1101 or m101a3(probably a2, but you'd have to check clearances).

 

[Evil Dr. Porkchop]

Those wheels have the same bolt pattern as m101a2 and m101a3 trailers, but I believe they'll hit the frame on your tool trailers without spacers. Here are a couple pictures of the 36" HMMWV tires on my old tool trailer. I used the wheels from an older DRASH trailer which fit about perfect. I believe the newer DRASH trailers use regular HMMWV wheels.

 

[rumplecat]

Did your tool trailer come with the surge brakes or did you change trailer frames? The tires look good on the trailer, but I am concerned you are right about the offset. I will check my long tool trailer tomorrow, I was wrong about the short trailers, both have the five lug hubs. Thanks for the photo.

 

[Evil Dr. Porkchop]

I bought it as an m116a1 without surge brakes and on the old 5 lug wheels. I put the box on an m116a3 HMMWV trailer frame then changed the axle for the narrower m116a2 axle.

 

[goldneagle]

Those tires will fit perfect on an M1101 and M1102 HMMWV trailers as well.