Anybody used Ace Rust Stop paint on their MV

[indy4x4fab]

Any body ever used this stuff called evapo-rust? I'm needing to paint the hole skeleton of my m129a2c trailer in side and out.

Evapo-Rust Rust-Block ™ - 1 Quart Container | AW Direct

http://www.evapo-rust.com/

 

[lavarok]

Any body ever used this stuff called evapo-rust? I'm needing to paint the hole skeleton of my m129a2c trailer in side and out.

Evapo-Rust Rust-Block ™ - 1 Quart Container | AW Direct

Evapo-Rust Super Safe Rust Remover

I used some to unstick a few metal hinges that had rusted stuck. I had tried heat and penetrating oil with no success, but a few days in the evapo-rust and the hinges were working again.

 

[Beerslayer]

I haven't used Evapo-Rust, but I have used Rodda's rust converting primer and it is just amazing. All you have to do is remove the scale and loose paint. I do that by pressure washing at 4000 PSI. Then spread the stuff on and it converts the rust to a black phospate finish. It takes days out of refinishing time. I was always a sandblast to white metal kind of guy not am thankfully done with that now.

 

[Andercomm]

I see Home Depot sells this stuff locally, in 1/2 G, 1 G, and 5 G bottle sizes..

I haven't used Evapo-Rust, but I have used Rodda's rust converting primer and it is just amazing. All you have to do is remove the scale and loose paint. I do that by pressure washing at 4000 PSI. Then spread the stuff on and it converts the rust to a black phospate finish. It takes days out of refinishing time. I was always a sandblast to white metal kind of guy not am thankfully done with that now.

 

[tigger]

I used POR-15 on my jeep frame and it still looks good!

 

[emr]

POR you will find will peel eventually in areas that oil has penetrated the metal,I stopped using it years ago because of this, Rustolium rusty metal primer and top coat are an oil base, so it is just fine with a little imperfections when oil and grease stains may be prevalent.

 

[Dukeboy]

I've used multiple paint over rust paints in the past and have settled on Rust Bullet as my favorite. They have a UV stable version. The black shell is very durable, It does dry to a glossy mirror like coating however. There are other places online, but I've been ordering it through summit racing lately.