Anyone have a bad alternator? I need parts.

[ida34]

I had a problem with one alt not charging. It was alt 2. I tore it apart and found the output stud loose. I found that the listed metal link had burned away by the excessive resistance and heat. I now need a new stud with nut, the insulating washer on the inside of the case, and the metal link pictured below. Does anyone have one that is bad that I could use for these items? The rest of my alt is in good shape except for the link and stud.

Thanks
Chuck

 

[ida34]

The insulator in the picture is not the one I need. I need the one that is inside the case. It looks like it is fiber.

 

[ida34]

I almost forgot. It is the 100 amp 12 volt isolated ground alt. Not the 28 volt found on some of the other cucv's. Mine is an M1009.

 

[CCATLETT1984]

I would just go down to a alternator rebuild shop, they will have those parts in stock for you.

If they dont, let me know and I'll get them from the local shop and mail 'em to ya.