- 1,505
- 1,171
- 113
- Location
- TN
I need to re-attach the load sensor air brake valve on my M1088. Anyone have a picture of this mounted that I can use as a reference? Thank you in advance!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Anyone have picture of properly mounted air brake load sensor valve on an m1088?
- Thread starter Reworked LMTV
- Start date
- 1,505
- 1,171
- 113
- Location
- TN
Just need a quick picture of how this brake load sensor is mounted. I took the 5th wheel off and am trying to recall where it was mounted. Thank you in advance!
Ronmar
Well-known member
- 3,825
- 7,422
- 113
- Location
- Port angeles wa
Well I don’t have any 1088 info available, but this video shows it on a 1079. When mounted, the end of the lever arm on the load sensing proportioner should be directly above the bracket that the cable attaches to…
Ronmar
Well-known member
- 3,825
- 7,422
- 113
- Location
- Port angeles wa
That would be correct…
- 1,505
- 1,171
- 113
- Location
- TN
Still need a picture of this item mounted, if you can spare the time : )
- 279
- 933
- 93
- Location
- Knoxville, TN
@Reworked LMTV , I just saw this. I'm picking up some overtime today at work, but if you don’t have pictures by 7 tonight I’ll snag some pictures off my 1084 when I get back home.
Last edited:
- 1,505
- 1,171
- 113
- Location
- TN
Thank you!
- 279
- 933
- 93
- Location
- Knoxville, TN
@Reworked LMTV , here’s the pictures. The first three are from the back facing forward and the last is from the front looking back.
Attachments
- 1,505
- 1,171
- 113
- Location
- TN
Thank you very much Godspeed!!
coachgeo
Well-known member
- 5,140
- 3,458
- 113
- Location
- North of Cincy OH
did a search for 1088 images etc. came across this video at 1:39 there in the rectangle spot that is sunlit, between the chassis rails, right side, you see what I think is the cable going up. Hope this helps.
coachgeo
Well-known member
- 5,140
- 3,458
- 113
- Location
- North of Cincy OH
maybe hit up @ckouba he has a M1088 .
- 279
- 933
- 93
- Location
- Knoxville, TN
Anytime, and if those don’t help much and you need any more or ones at any other angle just let me know.
We already chatted off-line. I don't have the valve in question. It may be the difference between an A0 and A1, or mine was deleted by someone...
coachgeo
Well-known member
- 5,140
- 3,458
- 113
- Location
- North of Cincy OH
@Ronmar just posted a picture from birds eye that might help conceptually. Its I think a 1079 though. Granted I think you got this figuredd out now and moved on.
Not sure from any of these pics where the cable from the arm attaches above to the bottom of x (x=bed, box, etc) though not sure that matters.. just as long as that cable is vertical?.
Not sure from any of these pics where the cable from the arm attaches above to the bottom of x (x=bed, box, etc) though not sure that matters.. just as long as that cable is vertical?.
Last edited:
- 2,018
- 5,177
- 113
- Location
- Portland, OR
S&S or the military or both deleted that on later trucks - I assume the ABS make it irrelevant or possibly it interferes with it's operation. If it's not the ABS then perhaps there is some other magic that could be adapted to older trucks? I'm far from an air brake system specialist but may be worth discussing if for no other reason than to understand how and why it was deleted.
- 1,505
- 1,171
- 113
- Location
- TN
Done! Thanks all for the help!