Anyone installed dual tanks on their deuce?

[RAYZER]

I added one on my deuce tractor but havn't decided how to plumb it yet,the six port valve looks like a good option!

 

[Lonesome715]

Manuel valves would be better than electric. my only concern is I would have to run the fuel lines into the cab.

 

[Lonesome715]

I added one on my deuce tractor but havn't decided how to plumb it yet,the six port valve looks like a good option!

I some how missed your post. I like that way yours turned out. Something about a duece tractor is just cool.

 

[RAYZER]

Thanks 715! Not to highjack your thread but There are more pics of it through the link in my Sig line.
I plan on running filtered wmo in the extra tank with a filter setup.

 

[Lonesome715]

Very cool thread.

 

[RAYZER]

Thanks 715! Not to highjack your thread but There are more pics of it through the link in my Sig line.
I plan on running filtered wmo in the extra tank with a filter setup.

 

[Csm Davis]

Get the valve and all the lines and tank off of a 818 or a 816 and the tank gage selector while you are at it, makes a complete bolt in kit, no fuel lines in the cab and all stock parts, so you or someone else can fix it later. Only thing you have to do different is a switch for the different pumps.

 

[Lonesome715]

That sounds like a gret way to do it. The problem is locating a 816 that is getting parted out.

 

[RAYZER]

Hey! I know where i can get those parts!

 

[Lonesome715]

You do? We need to talk.

 

[RAYZER]

You do? We need to talk.

Ha ha! No,for mine!

 

[Lonesome715]

Come on now, yours is almost complete. I am starting from scratch.

 

[RAYZER]

Ok I think if you start now you can drive it to the Ga rally!

 

[Vfflang]

you should be able to mount up to the frame in the same spot on the other side. On my deuce its moded and on the driverside got too love the m-series trucks

http://www.steelsoldiers.com/members/vfflang-albums-lang-deuce-picture21389-img-1757.jpg

 

[Lonesome715]

I hope I am done in time.

Yours looks like it came that way from the OEM.

 

[bones1]

Any of you guys get your tanks mounted and plumbed?. I need some hook up ideas for mine. And lots of pics.

 

[Csm Davis]

I have done a couple no real pics of the plumbing Though. Easiest way I can see is to use 5 ton parts for the gage switch and tank valves. Added a 24 volt fuel pump inline after the valve so no pump switching was needed. Got the pump from Ted's trucks. Tank off a 818 will put the filler at the right spot but a m35 tank will work.

 

[Lonesome715]

Photographs would be nice.

 

[joshs1ofakindxj]

Some pictures of my set up here: http://www.steelsoldiers.com/showthread.php?82138-Secondary-Fuel-Tank/page5

 

[Lonesome715]

Thanks.