• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Anyone looking for m-105 trailers in mid tn

SCSG-G4

SCSG-G4

PSVB 3003
Steel Soldiers Supporter
5,367
3,378
113
Location
Lexington, South Carolina
105's need a tall truck pintle location to be usable. That means a deuce or taller vehicle to pull it, hence not anywhere near as much interest in them vs the M101 series trailers. Back around 2010 the M-101 series were selling for $500+ while the M-105's were under $200. 750 now is about what 200 then was worth, but only if you have a deuce to pull it with IMHO.
 
porkysplace

porkysplace

Well-known member
Steel Soldiers Supporter
9,604
1,493
113
Location
mid- michigan
SCSG-G4 said:
105's need a tall truck pintle location to be usable. That means a deuce or taller vehicle to pull it, hence not anywhere near as much interest in them vs the M101 series trailers. Back around 2010 the M-101 series were selling for $500+ while the M-105's were under $200. 750 now is about what 200 then was worth, but only if you have a deuce to pull it with IMHO.
Click to expand...
You could get two 105's out of Wright-Patterson for $100 back then .
 
ToddJK

ToddJK

Well-known member
1,321
4,518
113
Location
Sparta, MI
chucky said:
Well you could buy one of these if that suits ya then grab it on the way home from the oct ralley
Click to expand...
I can't make the October rally this year. I don't think my head gaskets will hold up for that long of trip. I have a replacement set in the garage, but my old lady's journey just took a 💩 earlier today and literally dumped the entire crankcase full of oil on the ground. I think either something with intake or the oil cooler went out, could have been a head gasket but I won't know until I start tearing into it. I just keep getting more and more projects added to the list with little time to finish them 🤷.
 
ToddJK

ToddJK

Well-known member
1,321
4,518
113
Location
Sparta, MI
Found out her oil cooler ruptured and it's under the intake 🤦. Why would they put a plastic part under the intake with all that heat? Her car has more problems than what my deuce has and that's comparing a 54 year old truck to an 11 year old car that still has less than 100k miles. At least the part is not God awful expensive, but still, $300 can get me a good ways on tools or parts for my truck, lmao.
 
Mullaney

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,716
19,766
113
Location
Charlotte NC
ToddJK said:
Found out her oil cooler ruptured and it's under the intake 🤦. Why would they put a plastic part under the intake with all that heat? Her car has more problems than what my deuce has and that's comparing a 54 year old truck to an 11 year old car that still has less than 100k miles. At least the part is not God awful expensive, but still, $300 can get me a good ways on tools or parts for my truck, lmao.
Click to expand...
.
Glad you found the problem!

It is amazing how today's vehicles are held together with bubblegum and bailing wire. Meaning plastic that lasts for a few years, then deteriorates into nothing.
 
chucky

chucky

Well-known member
Steel Soldiers Supporter
6,622
18,965
113
Location
TN .
ToddJK said:
Found out her oil cooler ruptured and it's under the intake 🤦. Why would they put a plastic part under the intake with all that heat? Her car has more problems than what my deuce has and that's comparing a 54 year old truck to an 11 year old car that still has less than 100k miles. At least the part is not God awful expensive, but still, $300 can get me a good ways on tools or parts for my truck, lmao.
Click to expand...
Like a AMC 304 V8 using a nylon cam gear ! It wasnt for you it was for them !lol
 
You must log in or register to reply here.
110,879members
165,310threads
2,326,173posts
1,985online users
Top