wreckerman893
Possum Connoisseur
- 15,629
- 2,054
- 113
- Location
- Akenback acres near Gadsden, AL
If I remember correctly he had just bitten you on the leg and was trying to find something to eat to get the taste out of his mouth.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
April 28th trip to the CAMO compound
- Thread starter AMGeneral
- Start date
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Another sucessful "Murphy Free" recovery!!
Many Thanks to Papabear and the CAMO crew for the hospitality.
We really didn't push the 915 that hard on the trip back,pl;us we stopped several times for cheaper fuel and food,plus a few minutes to walk around and stretch out legs.
I have a few pics of the trip home and a video of the unloading at home,but no pics of what Ferro took home with him,that is classified.
Ferro left about 3PM headed south back to Columbia.
Video of the unloading !!
[media]http://www.youtube.com/watch?v=Nnb3RtVAMm8[/media]
Many Thanks to Papabear and the CAMO crew for the hospitality.
We really didn't push the 915 that hard on the trip back,pl;us we stopped several times for cheaper fuel and food,plus a few minutes to walk around and stretch out legs.
I have a few pics of the trip home and a video of the unloading at home,but no pics of what Ferro took home with him,that is classified.
Ferro left about 3PM headed south back to Columbia.
Video of the unloading !!
[media]http://www.youtube.com/watch?v=Nnb3RtVAMm8[/media]
Last edited:
- 12,195
- 325
- 0
- Location
- gainesville, ga.
I would guess it would have something to do with the wrecker you were pulling parts off a few weeks ago
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Dang...I'm impressed that id ran that long without running out of gas!
I think it took about 2 gallons to get her started and driven on the trailer...LOL
On a good note...now theres room to put the M816 back on the "ready line".
I think it took about 2 gallons to get her started and driven on the trailer...LOL
On a good note...now theres room to put the M816 back on the "ready line".
Attachments
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
Got home about 30min ago.
Total trip tallys-
879.01 miles
moving average- 50.1mph
Max speed- 65.3 mph
moving time 17:20
total time (includes gas and stops, but not loading, unloading, etc) 20:37
Whew!
Nothing remotely went wrong the whole trip, then I catch my exhaust stack on a limb in the yard, and knock it off!!!!
Total trip tallys-
879.01 miles
moving average- 50.1mph
Max speed- 65.3 mph
moving time 17:20
total time (includes gas and stops, but not loading, unloading, etc) 20:37
Whew!
Nothing remotely went wrong the whole trip, then I catch my exhaust stack on a limb in the yard, and knock it off!!!!
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Got home about 30min ago.
Total trip tallys-
879.01 miles
moving average- 50.1mph
Max speed- 65.3 mph
moving time 17:20
total time (includes gas and stops, but not loading, unloading, etc) 20:37
Whew!
Nothing remotely went wrong the whole trip, then I catch my exhaust stack on a limb in the yard, and knock it off!!!!
I hate it when that happens!~!!Attachments
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
about 5 min with a chainsaw, and the branch has eaten its last MV part!
MDSA
Member
- 705
- 12
- 18
- Location
- Valdese, NC
Came by Sunday afternoon after the new truck was unloaded. Massive gasoline engine. Nice see through fuel tanks. Another nice white deuce.
Trying to decide if Brandon has a "problem." When I met him, he only had 10 or so MV's. Now after some buying and selling, he only has 10 or so trucks. Is there no hope?
Trying to decide if Brandon has a "problem." When I met him, he only had 10 or so MV's. Now after some buying and selling, he only has 10 or so trucks. Is there no hope?
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
I would say that he does have a problem, all this time, and he still ONLY has 10 trucks!!!
Or you could say with regular 'treatments', he's managing the addiction well...
Or you could say with regular 'treatments', he's managing the addiction well...
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Hey wait a minute!!! They musta stopped off and made a trade enroute cause it was an M52 five ton when it left here!!
- 7,744
- 154
- 63
- Location
- Columbus Georgia
When you stop for the cheap fuel and looking to eat cheap - Mac D'd and B-ing all stack their food in the dumpsters very neatly and you can always catch the freshest stuff on top of the stack. Fine dining rule #1.
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
Sounds like a WM SOP...
At least to feed Elmo.
At least to feed Elmo.
bigugh20
Member
- 361
- 0
- 16
- Location
- Mt. Pleasant/ SC
Dang Adam, you've had bad luck with tree limbs lately. Glad you guys had a good trip. Brandon, looks like you got a nice truck!
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
UPDATE!!!
Since I had a few spare 6602 parts,I swapped the carb Sun evening,that cured all of the idling/running problems,truck starts easily, idles smooth and accelerates quickly.
I spent some time this evening installing a alternator conversion kit and working on the lights,with the exception of 2 blackout markers,all the lights work.
I aired up all the tires as well,adjusted the fan belts,and have the compressor belt pulley soaking to adjust it tomorrow.
I ordered a set of manifold gaskets today,should get them installed this weekend if I am here,after which I'll post another video of it running.
Since I had a few spare 6602 parts,I swapped the carb Sun evening,that cured all of the idling/running problems,truck starts easily, idles smooth and accelerates quickly.
I spent some time this evening installing a alternator conversion kit and working on the lights,with the exception of 2 blackout markers,all the lights work.
I aired up all the tires as well,adjusted the fan belts,and have the compressor belt pulley soaking to adjust it tomorrow.
I ordered a set of manifold gaskets today,should get them installed this weekend if I am here,after which I'll post another video of it running.
vtdeucedriver
Well-known member
- 2,523
- 38
- 48
- Location
- Vermont
Another Holly or Zenith???
The manifold gaskets surplus or something from NAPA?
The manifold gaskets surplus or something from NAPA?
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Holley carbs,both of em.
Surplus gaskets.
Surplus gaskets.
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Whoops,forgot these 2 pics were on the phone.
Attachments
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
UPDATE!!!!
Since the M52 was a w/winch truck,and I had a spare 5 ton winch,I went ahead and installed it last night.
Since the M52 was a w/winch truck,and I had a spare 5 ton winch,I went ahead and installed it last night.
Attachments
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
AMG I'm REALLY glad you got that truck.
I just couldn't stand to see her get mangled and made into a toaster!
I just couldn't stand to see her get mangled and made into a toaster!
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Thanks PB,
It looks right at home here with the rest of the 5 tons,I hope to get off work in time sometime next week to get to the machine shop and pick up the trued up manifolds,then get time to put it back together.
It looks right at home here with the rest of the 5 tons,I hope to get off work in time sometime next week to get to the machine shop and pick up the trued up manifolds,then get time to put it back together.