REDWOLF
New member
- 428
- 0
- 0
- Location
- Risingsun Maryland
Any one have any pictures of a M1009 with a artic kit installed? If so please share. Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Artic kit M1009
- Thread starter REDWOLF
- Start date
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
I have pictures but they are in 35mm. I am sure someone on here has some pictures. I have the Arctic grille cover and gate cover for the M1009. Original ones NOT reproductions.
camoyj7
Member
- 927
- 18
- 18
- Location
- wonder lake IL
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
Glad you had them pictures. I had 2 CUCV M1009's that had that complete arctic kit installed. Both were rusty junk when I removed the plywood and the insulation. Both also had the left front fender and inner fender hacked up and everything under the hood was poorly installed. Engine oil pan and transmission pan were a hunk of rust. Basically both were used as parts vehicles. I had great hopes for at least 1 of them but that did not work out. Really the plywood was a death sentence to the M1009. The floor and under structure was still wet and salt covered after being in my garage for 6 months. Nice green plywood marine grade. Layed around a few years and heated the garage nice one cold winter day.
Ilikemtb999
Active member
- 699
- 45
- 28
- Location
- Denver, CO
I have an m1009 that had an Arctic kit at one time. It had some pieces left and the previous owner gathered most of the stuff needed to put one back in but I never got around to it. I ended up putting a turbo on so there's no room for the kit in stock location anymore. Still have boxes of parts though
Ilikemtb999
Active member
- 699
- 45
- 28
- Location
- Denver, CO
that first link is my m1009
