Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
Sent from my iPhone using Tapatalk
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Auto crane 5005h on 925
- Thread starter Rmtaunton
- Start date
Sent from my iPhone using Tapatalk
Another Ahab
Well-known member
- 17,994
- 4,545
- 113
- Location
- Alexandria, VA
That's a right solid pedestal, and that tube steel in the frame looks serious; is that 1/2" wall?
I wonder what that stuff weighs per foot; like 10-12 lbs?
I wonder what that stuff weighs per foot; like 10-12 lbs?
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
About 25 and it's 3/8 the pedestal is 1/2
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Last edited:
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
There are two 5x5x3/8 main tubes and lots of 3/8 Chanel one is 30 " long in the crane side horizontal it will be welded to a 1/4 plate 30x12 with 8 3/4 grade 8 through the frame , the passenger side will have 4 bolts through the 3/8 x 3 angle
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Last edited:
Another Ahab
Well-known member
- 17,994
- 4,545
- 113
- Location
- Alexandria, VA
I believe your rig could take a hit from an RPG without a scratch! 
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
Well got Bubbles back from camp house all welding is done for the frame. Now just getting parts for the new hydraulics and need to build a pedestal for the boom , and order cylinder for the outrigger
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
Sent from my iPhone using Tapatalk
- 3,871
- 497
- 83
- Location
- Gray Court SC
There's only one problem I see.
It's not green and camo.
It's not green and camo.
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
Oh it will be before the Denton
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Leave it black and get green decals!
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
I was thinking of splitting the auto and crane part black and green , it will say auto crane one way or another
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Another Ahab
Well-known member
- 17,994
- 4,545
- 113
- Location
- Alexandria, VA
That rig will get some work done; sweet. ![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
For a minute there I thought you also had a scissors lift on the bed, but I see it's just a low riding trailer.
Nice set up!
For a minute there I thought you also had a scissors lift on the bed, but I see it's just a low riding trailer.
Nice set up!
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
Running under her own power
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
Sent from my iPhone using Tapatalk
m715mike
Well-known member
- 2,797
- 3,823
- 113
- Location
- Montgomery, Texas
It looks great. Awesome job!
- 3,871
- 497
- 83
- Location
- Gray Court SC
I like it now we need a video of it picking something up.
- 1,450
- 120
- 63
- Location
- Gray, GA
Really jealous now.
Just found out this morning that my crane won't unload the T-case in a can that GL put in the bed for me. The winch will pick it up fine but the brake won't hold it. Looks like I'll have to remove the 30~ bolts and unload the top and bottom separately. Sigh...I just put those bolts back in and sealed it back up.
I did pick up those 24v hydraulic power packs. I have yet to spec them out to see if they'll run a crane though. If they will, then the box will be mounted in the spare tire rack. Given all the wires and what I think are a couple of coils on the valves, I think they will run multiple functions. Not to fluent on fancy hydraulics so will leave that to the expert to figure it out.
Just found out this morning that my crane won't unload the T-case in a can that GL put in the bed for me. The winch will pick it up fine but the brake won't hold it. Looks like I'll have to remove the 30~ bolts and unload the top and bottom separately. Sigh...I just put those bolts back in and sealed it back up.
I did pick up those 24v hydraulic power packs. I have yet to spec them out to see if they'll run a crane though. If they will, then the box will be mounted in the spare tire rack. Given all the wires and what I think are a couple of coils on the valves, I think they will run multiple functions. Not to fluent on fancy hydraulics so will leave that to the expert to figure it out.
I bought one of those (without the box). I think that is a double acting valve, forward and reverse.Really jealous now.
Just found out this morning that my crane won't unload the T-case in a can that GL put in the bed for me. The winch will pick it up fine but the brake won't hold it. Looks like I'll have to remove the 30~ bolts and unload the top and bottom separately. Sigh...I just put those bolts back in and sealed it back up.
I did pick up those 24v hydraulic power packs. I have yet to spec them out to see if they'll run a crane though. If they will, then the box will be mounted in the spare tire rack. Given all the wires and what I think are a couple of coils on the valves, I think they will run multiple functions. Not to fluent on fancy hydraulics so will leave that to the expert to figure it out.
View attachment 671515
View attachment 671516
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Wired pendant or wireless? What did you find out on the solenoid voltage? Lookin good man!
I agree, we need video
I agree, we need video
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
It's not that bad at least you have all the wiring I had to figure mine out 12 volt solenoids 24v solenoids 24v pump all working together without backfeeding the 12v stuff , call me anytime if you got questions now to set the flow rates and pressuresReally jealous now.
Just found out this morning that my crane won't unload the T-case in a can that GL put in the bed for me. The winch will pick it up fine but the brake won't hold it. Looks like I'll have to remove the 30~ bolts and unload the top and bottom separately. Sigh...I just put those bolts back in and sealed it back up.
I did pick up those 24v hydraulic power packs. I have yet to spec them out to see if they'll run a crane though. If they will, then the box will be mounted in the spare tire rack. Given all the wires and what I think are a couple of coils on the valves, I think they will run multiple functions. Not to fluent on fancy hydraulics so will leave that to the expert to figure it out.
View attachment 671515
View attachment 671516
Sent from my iPhone using Tapatalk