Bed tie downs

[Jeepadict]

I came across a set of bed tie downs removed from a 1008/1028 that I would like to integrate into my civvy K25. Anyone know where they would be placed/located in the bed?

Sent from my SM-G970U using Tapatalk

 

[Bigbondo007]

Try this
https://r.tapatalk.com/shareLink/to...&share_fid=20191&share_type=t&link_source=app

Sent from my SM-N950U using Tapatalk

 

[Jeepadict]

Try this
https://r.tapatalk.com/shareLink/to...&share_fid=20191&share_type=t&link_source=app

Sent from my SM-N950U using Tapatalk

Perused the thread and the linked TM at length. They're abundantly clear for the shelter tie-downs for the M1028, but there's no info on the M1008/M1008A1 cargo tie-downs that are spread out along the outboard edges of the cargo bed. I know there's 8 similar with 2 dissimilar, but their exact placement is my loss.

Sent from my SM-G970U using Tapatalk

 

[cucvrus]

Look at another truck and measure them. I have the tiedowns and reinforcements. The Eye nuts are readily available. Nothing special about any of the hardware but the reinforcements and they aren't real special.

 

[Jeepadict]

Look at another truck and measure them. I have the tiedowns and reinforcements. The Eye nuts are readily available. Nothing special about any of the hardware but the reinforcements and they aren't real special.

I would love to copy-n-paste from another truck, but the only 1008 I'm aware of anywhere near me does not have them. If it did I wouldn't have wasted anyone's time asking for help.

Sent from my SM-G970U using Tapatalk

 

[cucvrus]

I can tell you this. All of them go into the crossmembers. There are only 2 crossmembers (minus the front one) on the aft axle bed floor and 2 on the fore axle bed floor. (minus the rear one) From there you need the special parts to attach them as they were from the factory. And it you have the parts the placement away from the side wall is self explanatory. I put them in M1028 beds before and you need a hole saw thru the crossmember bottom only and a 1/2" hole thru the bed floor. That is about as much help as I can offer. I no longer have any M1008's or beds around to look at.

 

[Bigbondo007]

84 m1028 with a M1008 gate. It didn't have rear tiedowns when I purchased it but has the holes. 4 blind nuts in the 1008 tailgate

Sent from my SM-N950U using Tapatalk

 

[cucvrus]

84 m1028 with a M1008 gate. It didn't have rear tiedowns when I purchased it but has the holes. 4 blind nuts in the 1008 tailgate

Sent from my SM-N950U using Tapatalk

I don't think he is talking about the M1028 tiedowns. He is referring to the 8 rings on the floor of the M1008 and M1008A1.

 

[Bigbondo007]

.

Sent from my SM-N950U using Tapatalk

 

[Bigbondo007]

I came across a set of bed tie downs removed from a 1008/1028 that I would like to integrate into my civvy K25. Anyone know where they would be placed/located in the bed?

Sent from my SM-G970U using Tapatalk

Well, which is it?

Sent from my SM-N950U using Tapatalk

 

[Jeepadict]

Well, which is it?

Sent from my SM-N950U using Tapatalk

My bad, thats what I get from quoting the sale ad. Its the 8 and 2 set from the 1008. I see you have the holes from the shelter tie-downs on a 1028...I learned that form the TM hahaha

Sent from my SM-G970U using Tapatalk

 

[german m1008]

........ Unfortunately I don't have more, the truck has been sold ........

 

[Jeepadict]

View attachment 815220View attachment 815219View attachment 815218

........ Unfortunately I don't have more, the truck has been sold ........

Great start for me, thanks for getting me started in the right direction.

Sent from my SM-G970U using Tapatalk