pbrstreetgang
Member
- 114
- 0
- 16
- Location
- Kentucky
Can anyone advise on purchasing Bilstein shocks for front and back on a 1986 Stock M1009 CUCV? I need part numbers, specs.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Bilstein Shocks
- Thread starter pbrstreetgang
- Start date
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
same as a civy blazer. Nothing special about the military blazers.
ida34
Well-known member
- 4,120
- 33
- 48
- Location
- Dexter, MI
I don't think it will matter in this case but when you get parts tell the parts guy it is a 1984. All GM cucvs were built to 1984 standards no matter what year they actually were.
davo727
Member
- 742
- 2
- 18
- Location
- Cleveland, TX , Spring , TX
Bilstein HD shocks are completely awesome
Farmin2010
New member
- 13
- 0
- 0
- Location
- West Virginia
Make sure you get the shocks for the 1 ton trucks, they have a different sleve where the shock mounts on the top. Somebody before me changed the ones on the front of my M1009 and now they're worn out and need replaced.
Cucvnut
Well-known member
- 3,804
- 61
- 48
- Location
- Carver, Oregon
Brad M
New member
- 100
- 0
- 0
- Location
- Belmont NC
Bilstein Part Numbers
M1009 aka K5 should be
F4-B46-0923-H0 front and
F4-B46-0933-H0 rear which are the same for the K10/K20
M1008 etc. aka K30 are
AK2042 front and
AK2043 rear
The first ones may work/fit on a K30 sized vehicle but I would not recommend maxing out the load with them.
M1009 aka K5 should be
F4-B46-0923-H0 front and
F4-B46-0933-H0 rear which are the same for the K10/K20
M1008 etc. aka K30 are
AK2042 front and
AK2043 rear
The first ones may work/fit on a K30 sized vehicle but I would not recommend maxing out the load with them.