Jeepsinker
Well-known member
- 5,399
- 456
- 83
- Location
- Dry Creek, Louisiana
Well Kenny you could always buy another one.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Bought A M275 Need some guidance
- Thread starter kblazer87
- Start date
wreckerman893
Possum Connoisseur
- 15,629
- 2,048
- 113
- Location
- Akenback acres near Gadsden, AL
You sooooooo funny Round Eye.
I got you this for your deuce.
Attachments
- 34,012
- 1,808
- 113
- Location
- GA Mountains
I'm going to have to pass on present and future deuce ownership. 20 years was enough, passing the torch to you young folk.
- 10,436
- 6,486
- 113
- Location
- Camp Wood/LC, TX
I think they are worth around $3000 in "as is running condition". I will have one for sale in January as soon as I can reinstall all the tractor items.
Attachments
Jeepsinker
Well-known member
- 5,399
- 456
- 83
- Location
- Dry Creek, Louisiana
Come on Kenny, we have a local member here that is in his mid 50's and just bought his first deuce. Don't tell me you're too old for it. Now, tired of the fuel bill or tinkering I could maybe understand. Myself, I find working on the deuce easier than any truck or passenger car I've ever had the displeasure of repairing.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Strong mind, weak back. I've grown weary of them. For 20 years I pushed the envelope of common sense with them from flat towing them with a 1 ton truck to taking 1300 mile trips towing a second deuce. On all these I never had a credit card with a super high limit. Somehow I managed to complete all the missions. I figured that it was time to move on before I did something I couldn't recover from. Some numbers from my stupidity and thinking I was bulletproof. 2800 miles of flat towing deuces with a 1 ton truck. Uncounted thousands of towbar miles towing deuces with deuces, 3300 miles of piggyback towing with the .......M275A2. I'm tired!
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Where did you get that info? TM says 50!
Attachments
Last edited:
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
You ain't done yet!
OK,that means you are now a Warrant Officer here to teach us what not to do. WO is the guy that has been there, done that and can teach the kids.
DO We have a "main thread" for towing?
If not maybe you could begin one!
Last edited:
- 903
- 314
- 63
- Location
- southeast Indiana
Ok, I went and done it now! I ended up buying the deuce today. Title says it is a 1978.
Data plate on dash says it is a Kaiser Jeep M275-A2 wo/wn.
Another data plate on the dash says fuel capacity per Federal Spec. VV f 800 is 110 gallons.
Truck runs but does have the trans. problem so will have to deal with that and the battery box is toast so will be looking at picking up one of those soon as well. Also the up pipe for the exhaust is shot as well, so I will be looking at probably replacing most of the exhaust. .
Forgot to mention it has a heater and is already plumbed for air chucks to air up tires and such. Also has an auxiliary power convertor hooked up. The bed is included and is only bolted on so will be easily removed.
The truck has issues I will need to deal with, but for the price I paid, I have lots of room to fix things. The biggest thing for me is the rust is very minimal. The battery box and a little bit on the floor behind drivers seat inside the truck. They have a carpet laid inside and that is the low spot where moisture pooled.
Data plate on dash says it is a Kaiser Jeep M275-A2 wo/wn.
Another data plate on the dash says fuel capacity per Federal Spec. VV f 800 is 110 gallons.
Truck runs but does have the trans. problem so will have to deal with that and the battery box is toast so will be looking at picking up one of those soon as well. Also the up pipe for the exhaust is shot as well, so I will be looking at probably replacing most of the exhaust. .
Forgot to mention it has a heater and is already plumbed for air chucks to air up tires and such. Also has an auxiliary power convertor hooked up. The bed is included and is only bolted on so will be easily removed.
The truck has issues I will need to deal with, but for the price I paid, I have lots of room to fix things. The biggest thing for me is the rust is very minimal. The battery box and a little bit on the floor behind drivers seat inside the truck. They have a carpet laid inside and that is the low spot where moisture pooled.
Attachments
Last edited:
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
Nice!
Hope you got a good deal!
Look and see if it has an Lds in it!
Hope you got a good deal!
Look and see if it has an Lds in it!
- 9,604
- 1,493
- 113
- Location
- mid- michigan
Do the frame numbers match the title ? If it's a Kaiser Jeep it should be a 1960's model.
- 903
- 314
- 63
- Location
- southeast Indiana
It is a turbo motor. Forgot to mention that. I think I did get a very good deal on it. Right at 165.00 a ton.
Last edited:
- 903
- 314
- 63
- Location
- southeast Indiana
As far as I can tell , yes.
- 9,604
- 1,493
- 113
- Location
- mid- michigan
This is a good article to figure out what year it is .
Deciphering the codes: Kaiser-Jeep and AM ... - Military Trader
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
Can't beat that!
Looks like it has an air shift transfer case!
- 903
- 314
- 63
- Location
- southeast Indiana
It does.
Monkeyboyarmy
Well-known member
- 1,337
- 193
- 63
- Location
- Kingsville,Oh.
I know that I wouldn't trade mine for anything. It sure is fun bobtailing it around. Even more as a convertable. Let me know if you need any pics or dimensions.
Attachments
- 2,096
- 646
- 113
- Location
- Orlando, FL
Nice looking truck!
- 903
- 314
- 63
- Location
- southeast Indiana
Thanks I will. I think I prefer the soft top. Will probably source one and swap the hard top. Also thinking I might super single. I think it would really look cool singled out. If I can find the tires and rims cheaply.
Thank you.
Last edited: