-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
bumper steps
- Thread starter bigmike
- Start date
Chevytruck
Active member
- 1,579
- 2
- 38
- Location
- Western Maine
for the front bumper, makes it easier to step up and check the engine. 
DieselBob
Active member
- 2,891
- 15
- 38
- Location
- Arnold Maryland
joeypushjr1
New member
- 367
- 1
- 0
- Location
- tallmadge ohio
hey chevy he wasnt asking what they are for hes asking what are they going for as in price wise .....
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
I've seen the silly things go for as much as $75.00 on fleaBay. Keep an eye out, I know you can find them cheaper than that.
Chevytruck
Active member
- 1,579
- 2
- 38
- Location
- Western Maine
opps! misread it sorry!
- 9,580
- 218
- 63
- Location
- Dickson,TN
Before I paid $75 for one I'd just get some flat bar and make one.
rivired
New member
- 226
- 2
- 0
- Location
- federal way washington
ya really u could make alot cooler ones that those originals too. i think i might do that now that i thought about it
dburt
Member
- 329
- 6
- 18
- Location
- NE Oregon & SW Idaho
I made my own 2-step and it folds up from my winch bumper and has a wire catch that hangs from a hole on the front fender brace to hold it in the upright posistion. Most folks who have seen it think it is OD and want to know where I got it. They like the longer length with two steps for us older duffers who have a hard time throwing a leg up as high as you need to for the one step.
rivired
New member
- 226
- 2
- 0
- Location
- federal way washington
ya thats a great idea..im 6'4 and still dont like the climb with the one solid step
wsucougarx
Well-known member
- 6,951
- 67
- 48
- Location
- Washington State
TNJMURRAY.COM has them for an incredible value of $95
Barrman
Well-known member
- 5,266
- 1,782
- 113
- Location
- Giddings, Texas
I saw one of these folding steps on Mike's truck at the '07 GA Rally and thought I had to have one. I got sticker shock and decided to wait. My last truck came with one from GL. It was one of the reasons I wanted that truck actually. Now that I have to live with it, I have thought about taking it off.
It rattles in either postion, it really isn't as stable as you would think, by the time you get your foot that low, you might as well have just jumped on down and if you try using it while it is folded up from the fender side, it will bend.
That is with 9.00 tires. When I swap over to 11.00's, my view might change some. What I am trying to say is that I think tail gate steps on the front bumper are probably a better choice.
It rattles in either postion, it really isn't as stable as you would think, by the time you get your foot that low, you might as well have just jumped on down and if you try using it while it is folded up from the fender side, it will bend.
That is with 9.00 tires. When I swap over to 11.00's, my view might change some. What I am trying to say is that I think tail gate steps on the front bumper are probably a better choice.
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
I do keep posting the PS mag refs to encourage you (new) guys to take a look at that section still at the old site, lots of info....
Attachments
dabtl
Active member
- 2,053
- 7
- 38
- Location
- Denton, Texas
I have bought two for around $20 lately. They are around in quantity, just be patient.
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,132
- 113
- Location
- Athens, Ga.
I bought both of mine on ebay for about $30 shipped-that's all I'd be willing to pay. If you are a real stickler for correctness/originality you will find that about half of the ones out there are missing their correct pin/chain setup to keep them locked in place and I have found no suitable replacement in terms of appearance.
I do like mine and would add them to all my trucks, but the prices on eBarf have been absurd.
Some enterprising smarty pants like dabtl should repro them-his M66 cab braces looked AWESOME.
I do like mine and would add them to all my trucks, but the prices on eBarf have been absurd.
Some enterprising smarty pants like dabtl should repro them-his M66 cab braces looked AWESOME.
- 10,865
- 762
- 113
- Location
- Appomattox, VA
I prefer the rear steps on the tailgate, unbolt them and attach them to the front of your truck instead. I got mine from TNJ Murray for $5 each, I just had to go there and take them off a junker truck myself.
Attachments
tm america
Active member
- 2,600
- 24
- 38
- Location
- merrillville in
i just use my chain from my winch i pull it down to where every i need it then set the winch lock i have a non foldable step but can reach it with the bigger tires .i wouldnt think youd want to give more than 40bucks for one since they would be so easy to make
goldneagle
Well-known member
- 4,513
- 1,016
- 113
- Location
- Slidell, LA
goldneagle
Well-known member
- 4,513
- 1,016
- 113
- Location
- Slidell, LA
I have an idea of building a 2 step design where the top step is fixed and the 2nd step swivels so it can be tucked under the truck during travel. If I can build them for under $95 will you guys buy them? I think they would be perfect for you 5 ton guys! I know my 5 ton bumper is way up there.