Cannon plug comparison

[FarmingSmallKubota]

I am looking to buy some cannon plugs to make a few cord sets for these 1000 watt generators i bought The part number on the male end of the cord that i need is CA3106E16-10PBF97. Looking online it appears they are like $78 any insight into a cheaper option would be appreciated. I have found some on Ebay but not exactly correct and i do not wish to busy something i can't use. The image below is what was offered on ebay if someone could say if this is going to work that would be great.

 

[Light in the Dark]

Why not just swap whats on the machine with something more readily available and modern, and source the mate that way?

 

[FarmingSmallKubota]

Unfortunately not a lot of options. This is on a Innipower/yammaha ie1000 watt generator. If there are plastic equivalents i will do it, but not sure how to look these things up. I can't put a standard 110 outlet in

 

[kloppk]

Arrow have the connectors in stock for $53.32 ---> CA3106E16-10PBF97

 

[flyfishtrailer]

Are they the same as these?

Amphenol MS3456W16-10P

 

[Poccur]

Unfortunately not a lot of options. This is on a Innipower/yammaha ie1000 watt generator. If there are plastic equivalents i will do it, but not sure how to look these things up. I can't put a standard 110 outlet in
View attachment 921091

You could change the black power panel back to the original and then drop in a receptacle....looks like partzilla have the panel for about $27...

 

[FarmingSmallKubota]

I see the panel, but i would also need the 12v outlet so we are just under what the plug cost, but I am going to open one up and look at the wiring to see how much needs changed. I have one of the first versions of the generator with regular face on it as well so i can compare.