• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

can't figure this switch out

Mrclean667

New member
5
0
0
Location
Albuquerque
read some manuels on the M54 and figured most things out but this switch I have no idea what it does. please helpimage.jpg
The switch to the right of the throttle pull handle. What it does?
 

Mrclean667

New member
5
0
0
Location
Albuquerque
I hear a whinning sound (mechanical sound) when depressed. It is spring loaded, dead man switch, it automatically returns to the off position when released
 

hklvette

New member
373
7
0
Location
Christiansburg, VA
It looks like the type of switch used for the M35's intake flame heater. Perhaps some sort of cold-start assist?

edit: Based on the noise you hear, almost definitely the flame-heater switch.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
From the TM 9-2320-211-10 Operators Manual, page 2-4, it is item #2

Manifold heater switch controls operation of the manifold heater and is used to facilitate
starting and warmup of a cold engine when temperatures are below +20º F.
 

jatonka

Well-known member
1,802
87
48
Location
Ephratah, New York
It is the manifold heat switch. Better if you don't actuate it until the engine is cranking over or it could send raw fuel into the intake and into the combustion chamber, leading to possible Hydro-Lock. Not a good thing
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks