Loose Deuce
New member
- 470
- 0
- 0
- Location
- South MS.
Who has some New or like New, wooden cargo bows ? The ones at Saturn are not that good and I need to get 3 for my Deuce. Three of mine were rotten on each end. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Cargo Bows
- Thread starter Loose Deuce
- Start date
acetomatoco
New member
- 2,198
- 7
- 0
What style, dropside or fixed side??
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,129
- 113
- Location
- Athens, Ga.
John Tennis (jatonka) here on SS.
I believe he has very nice wooden pieces.
I believe he has very nice wooden pieces.
alphadeltaromeo
Active member
- 1,901
- 3
- 38
- Location
- Alto, GA
Yes Clint is right on the money. I've seen them and they are excellent quality, made by an Amish craftsman. I'd recommend his 100% John (jatonka) gets them new and you'd be pleased with them.
Andy
Andy
HeadWizard
New member
- 729
- 2
- 0
- Location
- Chantilly, VA
I have a big pile of bows and cargo tops (9 or 10). Let me know what style or send a pic.
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
bow
Anybody know how they put the "bow" in the top bows? Are they cut that way from a board, Put in a form wet and then dried or maybe put in a press and steamed? Wayne
Anybody know how they put the "bow" in the top bows? Are they cut that way from a board, Put in a form wet and then dried or maybe put in a press and steamed? Wayne
Loose Deuce
New member
- 470
- 0
- 0
- Location
- South MS.
I need the ones for the fixed side cargo area.
Loose Deuce
New member
- 470
- 0
- 0
- Location
- South MS.
I was wondering about how thy made them with the bow in it also. Two of the Saturn bows I received were almost straight, could they still be used ? they are really stiff.
Loose Deuce
New member
- 470
- 0
- 0
- Location
- South MS.
Headwizard check your PM
- 10,865
- 751
- 113
- Location
- Appomattox, VA
Re: bow
I believe they are put in a form wet and then dried. You can do this yourself by getting 1x3 inch oak at Lowe's and soaking them in water for a few days, and bending to shape, and let dry for a week or so.papercu said:
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
bows
i was mainly curiosity on how the manufacturer did it it a large scale. Wayne
i was mainly curiosity on how the manufacturer did it it a large scale. Wayne
MikeON
Member
- 134
- 12
- 18
- Location
- Lucinda PA
I have a sawmill and plenty of oak, and planned to try making my own cargo bows. Can someone tell me how much bow to put in them?
I already have the sides and corner pieces. It is a dropside.
Thanks,
Mike
I already have the sides and corner pieces. It is a dropside.
Thanks,
Mike
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
bow
On mine(dropside) it is a about 2 1/2 inches from the bottom side of the bow to level and 75 1/2 inches long. Wayne
On mine(dropside) it is a about 2 1/2 inches from the bottom side of the bow to level and 75 1/2 inches long. Wayne
colyork
Member
- 577
- 0
- 16
- Location
- dexter maine
RE: bow
I made three pieces that "bowed" after I put the on the truck. I used 1x6 pressure treated boards.
I made three pieces that "bowed" after I put the on the truck. I used 1x6 pressure treated boards.
- 4,807
- 736
- 113
- Location
- Liberty Hill, SC
RE: bow
I have about 80 bows, NOS. PM me if anyone needs them.
I have about 80 bows, NOS. PM me if anyone needs them.
ToddInMT
New member
- 43
- 0
- 0
- Location
- Blackfeet Nation
RE: bow
Ferro - PM sent.
I need bows adn covers and such in desert tan for the new money pit. if anybody has what i need, i would be interested. thanks in advance. and im in Montana btw.
Ferro - PM sent.
I need bows adn covers and such in desert tan for the new money pit. if anybody has what i need, i would be interested. thanks in advance. and im in Montana btw.