KAT MAN
Member
- 30
- 0
- 6
- Location
- California
I tried searching but I couldn't find any threads on people who have put a Caterpillar 3406 or Cummins N14 in their truck.
Has anyone done this swap?
Has anyone done this swap?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Caterpillar 3406 or Cummins N14 engine swap
- Thread starter KAT MAN
- Start date
jasonjc
Well-known member
- 5,326
- 290
- 83
- Location
- Gravette Ar.
I don't think that would fit. Look at how much they had too stretch the M39 5 tons to make the M809's to fit the 250 into them.
SLOrazorsedge
Member
- 415
- 5
- 18
- Location
- San Luis Obispo, Ca
3406 head is huge, long and takes 3 men and a boy to lift. Check the specs on that motor just on weight alone ��
KAT MAN
Member
- 30
- 0
- 6
- Location
- California
I see your points it would be nice to pop a motor in that has more power and torque
How about a CAT C12? they come in 430hp variant
How about a CAT C12? they come in 430hp variant
jasonjc
Well-known member
- 5,326
- 290
- 83
- Location
- Gravette Ar.
Think more like a 5.9 or 6.7 Cummins.
SLOrazorsedge
Member
- 415
- 5
- 18
- Location
- San Luis Obispo, Ca
Ditto on the 5.9 Cummins 24 valve. Check out member HanksDeuce build here and utube. He also has a website build. You can spin those 5.9s way up in HP, 500 hp is pretty easy to attain. Shoehorning the 5.9 into a Deuce was no small chore, Hank does a fabulous job documenting his build with narrative and photo gallery!