Check your front spring mounts (920 series)

[Abrant23]

Found this interesting little failure while greasing the 917 this week. Worth noting.

 

[simp5782]

I've seen that before.

The other issue is that some of the cab/engine mount brackets are not open at the bottom . I know on the 915A1s they are for sure not open. I've seen some 916s that weren't

But they fill with water and it pools in the bracket and can't get out.

Not too good a pic of the inside or the outside part but you can see the rust built up on that 915a1

 

[Abrant23]

I've seen that before.

The other issue is that some of the cab/engine mount brackets are not open at the bottom . I know on the 915A1s they are for sure not open. I've seen some 916s that weren't

But they fill with water and it pools in the bracket and can't get out.

Not too good a pic of the inside or the outside part but you can see the rust built up on that 915a1

I had to rebuild both sides of the front cab mounts on the 917

 

[simp5782]

Yep mine did that too

 

[Bill Nutting]

I assume these issues would apply to my M934. As soon as I am able, I have some crawling around to do…

 

[simp5782]

I assume these issues would apply to my M934. As soon as I am able, I have some crawling around to do…

Nah they are open and solid mounts for the most part