• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Clear Fuel Line for Gen Sets

rumplecat

Well-known member
Steel Soldiers Supporter
2,037
221
63
Location
North West Arkansas
Has anyone used some of the clear fuel line(diesel) that is available, if so where did you buy it and how has it held up? The last couple of military gen sets I have gotten had what I guess was clear when it started out but turned yellow and brittle!
 

juanprado

Well-known member
Steel Soldiers Supporter
5,608
2,906
113
Location
Metairie/La (N'awlins)
For whatever you think it is worth...

I sold parts for a few years :) and can tell you the clear hose does not hold up well over time. Cracks, leaks, turns yellow and hard as a brick. It is single walled where quality rubber fuel hose is multi layered and woven. Much better to replace with quality hose. Now if you want to "see" in it, I would sell the quality glass fuel filter set up. Not sure if it is diesel rated but you can always remove the filter cartridge and use it as a looking glass.
 

rumplecat

Well-known member
Steel Soldiers Supporter
2,037
221
63
Location
North West Arkansas
On Gen sets i store them dry, and since I seem to have s hoarding mentality on them(i have over a dozen of them) it is really nice to rule out fuel as an issue why one is not cranking, if you can see it you know it is there!
 

M543A2

New member
Steel Soldiers Supporter
1,063
11
0
Location
Warsaw, Indiana
An industrial supply house called McMaster Carr has fuel and lubricant rated PVC and Tygon hose in sizes 5/64. 3/32, 1/8, 3/16/ 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 ID. Color is "clear yellow". They advertise the Tygon as being higher quality than PVC and able to withstand lower temperatures than the PVC. Depending on size, available in 10, 25, and 50 foot coils in most cases. Their phone number is 630-833-0300 in Chicago. I always get good quick service and quick shipping from them for big and small orders. It is listed under the title of "Fuel and Lubricant PVC Tubing" in the catalog.
Regards Martin
 

rustystud

Well-known member
9,266
2,962
113
Location
Woodinville, Washington
An industrial supply house called McMaster Carr has fuel and lubricant rated PVC and Tygon hose in sizes 5/64. 3/32, 1/8, 3/16/ 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 ID. Color is "clear yellow". They advertise the Tygon as being higher quality than PVC and able to withstand lower temperatures than the PVC. Depending on size, available in 10, 25, and 50 foot coils in most cases. Their phone number is 630-833-0300 in Chicago. I always get good quick service and quick shipping from them for big and small orders. It is listed under the title of "Fuel and Lubricant PVC Tubing" in the catalog.
Regards Martin
The problem with all "clear" fuel hoses is they are not really rated for fuel. They can function for awhile but go bad pretty quickly. The hoses on the MEP-531a is a prime example. They must be replaced every 2 years. That is why I'm going with a real fuel rated hose this time.
 

Guyfang

Moderator
Staff member
Moderator
16,697
23,906
113
Location
Burgkunstadt, Germany
We tried every clear hose on the face of the earth. They all turn yellow and get brittle after a while, and the JP4 or JP8 made it worse. Once, a unit in the first sandbox war called me to ask about JET-A1 fuel. I told them you can use it for generators, but try to not use it over a long time. The additives in the JET-A1 turned the lines brittle MUCH faster. But when that's all you can get, that's all you can get.
 

DieselGenAC

New member
53
2
0
Location
NJ
The clear fuel line allows you to see if the fuel system is air bound. The little 2kWs and their gravity feed don't run well if there is lots of air near the injection pump. If you know a set well and can spot fuel issues by ear, you can replace the clear tubing with proper fuel line.I have also had good luck with fuel specific PVC, usually yellow tinted but still translucent. It stays flexible much longer than typical cheap clear PVC. http://www.flextubing.com/products/fuel/fuelflex-65/ or http://www.usplastic.com/catalog/item.aspx?itemid=85324&catid=579EDIT - stupid truncated URLs, search for Excelon Fuel & Lubricant Tubing
 
Last edited:

Guyfang

Moderator
Staff member
Moderator
16,697
23,906
113
Location
Burgkunstadt, Germany
That is the biggest, and almost only problem of the 2KW. You can bleed forever, that fuel line, and under load, STILL hear that little bit of stutter.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks