• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Coming Attraction - project #6 M43 build

Status
Not open for further replies.
papabear

papabear

GA Mafia Imperial 1SG
13,523
2,484
113
Location
Columbus, Georgia
Outstanding work Zout!!
We at CAMO are all cheering for ya from the compound.[thumbzup]

I showed the CAMO fellers some of your build pics yesterday and they were all amazed.:grin:

Looks like we are gonna have to throw a "new member" party early next month!:jumpin::jumpin:
Blue2actual's wife had her baby too!!:-D:-D

Life is good!:-D
 
zout

zout

In Memorial
In Memorial
7,744
155
63
Location
Columbus Georgia
Tell her congrats on the new memeber to Life.

Here is where I wound up at the end of today. If my brain was not fried from the heat I think this is where I wanted to end up at the end of the day today.

I am not working on the 43 tomorrow - going to sit and sift out sandblasting media so I can get that nasty a** hood - do not care what I throw at it cause it is that bad w/paint - bondo (NO I DO NOT DISLIKE BONDO) (IT JUST HAS ITS PLACE).

I have my Wild Dog degreaser for pressure washing - this stuff is wicked.

That engine compartment will be beconning for a power plant in the near future.

What comes next after Body work - The ambulance section - sandblasting. I will lay my big tarp out for collection of media so I can hammer the living daylights out of it with this new pressure blaster (its really cool). Then move into the cab.

I need to finish blasting the tire carrier rack - other side of the grille and the center section - with this new toy it should take only a couple hrs and keep screening my media.

TWM - only teach on REAL TOOLS - gotta get the new younin using the high speed grinder here in a couple months :jumpin::jumpin::jumpin::jumpin:

This 43 is so FRICKIN COOL

Pics
 

Attachments

Danger Ranger

Danger Ranger

New member
2,253
24
0
Location
Roland, IA
Zout you are a FREIGHT TRAIN!!!! Always chuggin along. Congrats on the new member. A few days off might do the kid and your brain some good. But don't keep us waiting too long, lol! Awesome job, I'd call it a successful weekend.:jumpin::jumpin::jumpin:[thumbzup]
 
zout

zout

In Memorial
In Memorial
7,744
155
63
Location
Columbus Georgia
DR - I can put a younger man in the grave working with me. And I am only 59.
Once I have a MISSION - no need to say more as the pics of all my projects explain it all.

Wanna know what its like to work for a living - come send that PIA teenager to me for a weekend of treatment and home thearpy. If their not dead after seveal days they will be worth while to send back to you in a much changed attitude.

Duct Tape - lots and lots of Duct tape
 
schwenk industries

schwenk industries

Member
188
1
18
Location
Illinois chicagoland suburbs
WOW! I don't look on this thread for a while, and what do ya know three more pages of great work to catch up on.[thumbzup] Congrats on the grandson. Keep up that quality work its %100 better than how I have been working...Not at all...now that I have time:roll:
 
zout

zout

In Memorial
In Memorial
7,744
155
63
Location
Columbus Georgia
I will have to look around for my tape measure - last time I saw it was when I re-tiled the shower - grandkids probably got their paws on it - then try to get you measurements around all my crap in the back.

I tried to wipe the paint off the harness - kind of like why I used duct tape - it will bounce off only for a short time (not like wiping the nozzle across your hand with no glove on) (yes I did that:cookoo:). I hit the connectors for a little longer plus the # tags - I will wipe a little grease on these to keep from paint sticking - then wash it off later.

You can tell the before and after of the fender seal - there were LARGE cracks in it from all the paint - got it down to rubber - which I should really coat and cover up but I didn't.
 
zout

zout

In Memorial
In Memorial
7,744
155
63
Location
Columbus Georgia
Plan is to chuck on the air respirator - soft out some sand and get inside the engine compartment for a final cleaning like I want it - this first was just to knock off the debris - greasy areas are tough to blast so I will scrape down that panel on the right lower side of the pic above and hit it again.

No rain in sight around here so I may close the hood and wack off the top while I am at it - I can always get a coat of oxide on it. Then get inside the front fender wells for a blast out.

Had the tarp out last night and pretty much saved what I shot and sifted it out again. Just too hungry when I posted last night to update anymore plus almost time to go to bed as I am a big ole sissy.

Passenger side glass is busted so I will just duct tape off the drivers side really good for the framework blasting (PB knows how I am giong to get the rusted out front area - I will only show a before and after pic of how I am going to do this area.
Then onto the roof.
 
Danger Ranger

Danger Ranger

New member
2,253
24
0
Location
Roland, IA
To be completely honest, i posted that after reading Zout's stuff....he has a purpose like none other in projects. But.......you can have a plan too:lol:
 
Tinwoodsman

Tinwoodsman

Well-known member
Steel Soldiers Supporter
3,923
76
48
Location
Comfort, Texas
Fantastic Zout. Here I am sitting with a cold beer after blasting, primer and painting a bunch of brackets, hinges, small parts, etc. and feeling good about the day. It is obvious I couldn't be in the same room with you and your talent. I enjoy your posts.
 
Danger Ranger

Danger Ranger

New member
2,253
24
0
Location
Roland, IA
What would it take to get you up here to do my projects Zout?!?!?!? Its cooler up here!!;-);-)[thumbzup] Can you work on tractors? hehe.

AWESOME job, the jealousy factor is rising....
 
Status
Not open for further replies.
112,638members
166,218threads
2,341,097posts
1,176online users
Top