• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Complicated Antenna Base(CUCV)

rumplecat

Well-known member
Steel Soldiers Supporter
2,036
221
63
Location
North West Arkansas
Found a scrapped 1008 bed in a local junk yard, bed was toast but it did have a couple of antenna mounts and a base. This base is much more complex than the one I currently have on my truck, just for looks.

IMG_2015.jpgIMG_2012.jpg
 

MWMULES

Well-known member
Steel Soldiers Supporter
In Memorial
5,580
349
83
Location
DESOTO, KANSAS
It will take a different size lower antenna section also, it's an old school matching unit MX-6707



you probably have the newer AS-3900A/VRC singars type on your truck now. singars.jpeg
 
Last edited:

NDT

Well-known member
Steel Soldiers Supporter
10,509
6,645
113
Location
Camp Wood/LC, TX
Back in the 90's, that was the hot antenna setup all the collectors were looking for to put on the back of M151's and etc. The fiberglass masts were always hard to find. Most of us were still running AB-15 type antennas.
 

rumplecat

Well-known member
Steel Soldiers Supporter
2,036
221
63
Location
North West Arkansas
Is it just the base of the whip antenna, are the other sections interchangeable? I have several of the lower sections, I guess I need to try them!
 
Top