compressor wrench

[nczo6]

Does anyone have any of these wrenches for sale? or have one i could borrow?

 

[ctmustang]

You can use a big pair of channel locks on the outside and a big adjustable wrench on the inside to hold it. I'm in high point if you need help.
CT

 

[python86]

I did it the same way but had to heat the pully some to get it to break free.

 

[ctmustang]

Soak it down with pb blaster or wd40 and then wait til the next day. Loosen the bolts then spread the split a little then turn.
CT

 

[scopionf89]

check ebay. I bought myen their. I always keep my eyes open on ebay for mislanous tools that I think I might need that are spacific to the duece. I bought the compresser wrench, and a bag full of an asortment of tools so I could get the tools listed that were duce spacific.

 

[319]

Does anyone have any of these wrenches for sale? or have one i could borrow?

Check with comdiver, he had them for sale in the past.

 

[jasonjc]

Check the classifis some members here have had them made to sell here. If I rember right $20-30 shipped.?.

 

[twright]

Check with CARNAC he did have some
AEC Retired Tony

 

[bassetdeuce]

I really like Comdiver's compressor wrench. It is quite strong, as I have used long breaker pipe and hammers on it, and have not managed to break it. He may still have some.

 

[O.D. Fever]

I went the channel lock route and it worked. I would like a wrench.

 

[Heavysteven]

Check with CARNAC he did have some
AEC Retired Tony

Dito, I bought one from him last week.

 

[bguy193]

I really like Comdiver's compressor wrench. It is quite strong, as I have used long breaker pipe and hammers on it, and have not managed to break it. He may still have some.

I can say the same...............I got mine from Comdiver and it is built extremely well. Where ever you get one from you will see that it is worth it's weight in gold.

 

[nczo6]

Thanks for all the replies guys, CT ill keep you offer in mind, Thanks.

 

[CARNAC]

Hate to say it but I think all of mine were packed away for the winter. I preloaded a 280 shelter on trailer for the NJ Show and a fair amount of stuff is in it. I will check and see if I can find one laying around but it might be a loan not a sell.

 

[Heavysteven]

Just finished changing my belts. That wrench is perfect, really made the job easy. It's a must have.

 

[Tinwoodsman]

I am looking for a wench too!!!

 

[jatonka]

Both Carnac and Comdiver are great guys, only difference is Comdiver makes the compressor wrenches. He will probably always have them and is happy to sell them. JT out

 

[bcowanwheels]

If this is for a cummins 855 i have one >
bob

 

[rosco]

So what does this mystery wrench look like? Last summer I was out in the bush with a new set of belts. After a few days running, the new wore off the compressor belt, and it started slipping a little, on start-up. I didn't have big tools with me, and it was difficult to increase the tension much. I'm not real impressed with the compressor pulley, for that reason. Its not readily apparent how much you are tightening it, or just squeezing it. Anyway, that is something to carry with you.

 

[comdiver]

I still make the compressor wrench. I also am making a second on that fits the back half of the pulley, 1 13/16". I charge $30 for either wrench or $50 for the pair. These prices incluide priority shipping in the USA. I take Pay Pal or you can mail me a check. My PayPal address is usatech@earthlink.net Please let me know what you would like.
Chip