The amphenol brand connector I gave the part number to is available individually.
I don't know if it comes as a complete assembly or not, as the Amphenol brand you have to buy the components separately and assemble yourself (which is why I have so many part numbers listed in the first post in this thread)
Looking through the Mouser website, and the ITT Cannon datasheet, what it looks like you really need is going to be a longer part number, to include things like the wire support and
Datasheet. Check pages 11, 20, and
Explanation Series CA – Circular connectors with bayonet coupling
Shell style
3100 – Wall mounting receptacle
3101 – Cable connecting receptacle
3102 – Box mounting receptacle
3105 – Dummy receptacle for front and panel mounting
3106 – Plug, straight
3108 – Plug, 90°
TBF – Bulkhead receptacle
Class
E – environmental with resilient insulators and endbell with clamp and bushing
F – environmental with resilient insulator and endbell for flex tube
R – environmental with resilient insulator and shortened light-weight endbell without cable clamp
Shell size 10SL, 12S, 14S, 16S, 16, 18, 20, 22, 24, 28,
32 and 36
Contact arrangement See pages 13 to 26 (in this case it's "1")
Contact type
P – Pin
S – Socket
PS – one side pin, one side socket (only for TBF)
Insulator position Besides the normal position further insulator positions are possible for Cannon connectors (see page 13-26) to prevent mismating. Polarization is achieved by turning the pin contact insulator clockwise towards the shell, the socket insulator, however, in opposite clockwise direction. This information refers to the mating side of the contact insulator. For special insert alternations of standard inserts see page 24
Now, if you add some modifications, it WILL show up on the mouser website, for sale individually.
Modifications (only for CA......-B)
01 – metric crimp contacts
02 – adapter for heat shrink boots AWG crimp contacts
03 – adapter for heat shrink boots, metric crimp contacts
04 – rear mount, thread holes in flange, metric crimp contacts (CA3102 only)
05 – rear mount, through holes in flange, (CA3100, CA 3102, rear mounting CA 20, TBF)
06 – adaptor for heat shrink boots, solder pot contacts
08 – angular endbell, thread holes in flange (for CA3100 only)
09 – angular endbell, through holes in flange (for CA3100 only)
13 – shielded version, solder pot contacts
14 – shielded version, metric crimp contacts
15 – shielded version, AWG crimp contacts
32 – shielded version, reduced cable entry diameter
41 – grounding spring on barrel
109 – F80 contacts, rear mount, thread holes in flange (for CA3102 only)
111 – rear mount, thread holes in flange (CA3102 only), solder pot contacts
F80 – AWG crimp contacts
A176 – gold plated contact, see pages 59-60
A232 – Zinc cobalt black plating A240 – Zinc Nickel plating, blue grey plating
A241 – Tin Zinc matt grey plating, VG approved
F42 – less grommet and backshell
F0 – less contacts, contacts to be ordered separately, see page 61
All that is really to say, the numbers get a little confusing, but a general search of the part number brought up a list of them with different modifications, all available individually, but all appear to have a 20 day wait time to order.
