DCottle
New member
- 8
- 0
- 0
- Location
- Louisville, NE
Ok, for the first few months my CTIS was working fine...
Now, when I turn it tried to increase the pressure in the CTIS readout to the required pressure for my chosen setting (for example, Highway = 45 psi). It gets up to 13-14 sometimes, and then it registers "FLAT?" in the uppre right corner.
No tires look flat. The main air pressure gauge on the front dashboard hovers between 90-120...mostly around 120.
I do not have alot of mechanical experience, but I am willing to learn. Can somebody please give me some idea as to where to start in diagnosing and fixing this problem so the CTIS will work again?
Thanks.
Now, when I turn it tried to increase the pressure in the CTIS readout to the required pressure for my chosen setting (for example, Highway = 45 psi). It gets up to 13-14 sometimes, and then it registers "FLAT?" in the uppre right corner.
No tires look flat. The main air pressure gauge on the front dashboard hovers between 90-120...mostly around 120.
I do not have alot of mechanical experience, but I am willing to learn. Can somebody please give me some idea as to where to start in diagnosing and fixing this problem so the CTIS will work again?
Thanks.