rizzo
Active member
- 2,841
- 8
- 38
- Location
- Port Huron, MI
so what can you do with that radio in laymans terms?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CUCV Build... Here We Go Again...
- Thread starter devilman96
- Start date
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Fry's bacon, toasts bread!
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Well, back to the grind...
I have most of the cab body work done now after sandblasting... If this is looking a little backwards it’s because we’re trying to leave the front clip intact as long as possible.... which isn’t going to last MUCH longer! So basically at this point the cab rearward is ready for paint.
Still need to strip the dash, air box, steering column, etc out... Not looking forward to that mess.
We’re working on a intake in prep for the 6.5... First and foremost was getting the air flow out from under the hood... Second was adding to the fording ability... Yes I know... I'll never use it... highway queen... blah blah blah... but I have one and you don’t so that’s what counts!!! lol Still a ways to go on the construction but in the end it will look like one seamless piece and be lined and molded to the body… and if you find this little feat annoying just wait till we do the exhaust stack!
10K winch that I picked up for the truck a few months ago... Ive got the front brush guard done and ready to paint... I'll get pics soon but its a pretty cool fab job for holding a winch and still looking very stock!
Tail gate is back in one piece... New handles were powder coated black, new weather stripping, window runs etc... Windows motion going up and down is SWEET!
The seat base for the rear seat... We built and adapter for the Yukon seat so it will fold down and forward just like the stock seat... Gotta get the seats redone in black yet but this mess needed to be welded up and done first... The bottom of the seat will get covered in aluminum plating when finished to give a nice hard headboard to the bed when folded up.
I have most of the cab body work done now after sandblasting... If this is looking a little backwards it’s because we’re trying to leave the front clip intact as long as possible.... which isn’t going to last MUCH longer! So basically at this point the cab rearward is ready for paint.
Still need to strip the dash, air box, steering column, etc out... Not looking forward to that mess.
We’re working on a intake in prep for the 6.5... First and foremost was getting the air flow out from under the hood... Second was adding to the fording ability... Yes I know... I'll never use it... highway queen... blah blah blah... but I have one and you don’t so that’s what counts!!! lol Still a ways to go on the construction but in the end it will look like one seamless piece and be lined and molded to the body… and if you find this little feat annoying just wait till we do the exhaust stack!
10K winch that I picked up for the truck a few months ago... Ive got the front brush guard done and ready to paint... I'll get pics soon but its a pretty cool fab job for holding a winch and still looking very stock!
Tail gate is back in one piece... New handles were powder coated black, new weather stripping, window runs etc... Windows motion going up and down is SWEET!
The seat base for the rear seat... We built and adapter for the Yukon seat so it will fold down and forward just like the stock seat... Gotta get the seats redone in black yet but this mess needed to be welded up and done first... The bottom of the seat will get covered in aluminum plating when finished to give a nice hard headboard to the bed when folded up.
Attachments
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Closing up for the night....
Attachments
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Well... 2 days of beating and welding and here we have the intake... Need to find a 3" mushroom vs the 4" deuce one were using. Still needs grinding and finishing but so far so good...
Attachments
- 34,012
- 1,808
- 113
- Location
- GA Mountains
These CUCV snorkles will be for sale at the FL Rally for just $9.95....but wait! If you order in advance you will get the snorkle and a complete turbo 6.5 engine to complete the package absolutely free! The first 50 callers will also get 2000 blue LED lights to use as you choose. Don't wait, order today!
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Also we will be giving away a free M108, two M105, M101, M35A2C... and oh yes I almost for got a Burb with a 4 inch lift sitting on 31" tires with some purdy aluminum wheels!! :
:
:
- 26,246
- 1,178
- 113
- Location
- NY
Also we will be giving away a free M108, two M105, M101, M35A2C... and oh yes I almost for got a Burb with a 4 inch lift sitting on 31" tires with some purdy aluminum wheels!! :
This is gonna be the best Fl rally ever!
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Boy, if I could get all that it would double my collection almost perfectly.
PS, try to get rid of my pickup truck and semi trailer first!
PS, try to get rid of my pickup truck and semi trailer first!
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
A few more pics of the distruction... Dash is empty... Wiring harness, heat, etc gone.. Door, fender, etc... by tomorrow night it will be a bare cab!
Guys if anyone out there can cut cab corners PLEASE PLEASE PLEASE i NEED them!!!! I would have this thing painted by Sunday but im lacking the only pieces of the bodywork I cant finish... If you can cut them I will send a overnight lable for them and pay you for your time!!!!!!
Guys if anyone out there can cut cab corners PLEASE PLEASE PLEASE i NEED them!!!! I would have this thing painted by Sunday but im lacking the only pieces of the bodywork I cant finish... If you can cut them I will send a overnight lable for them and pay you for your time!!!!!!
Attachments
Chevytruck
Active member
- 1,579
- 2
- 38
- Location
- Western Maine
sorry to burst bubbles here but is this true or just sarcasm?Also we will be giving away a free M108, two M105, M101, M35A2C... and oh yes I almost for got a Burb with a 4 inch lift sitting on 31" tires with some purdy aluminum wheels!! :
i will probably never understand the true meaning of sarcasm lol
BFR
Rocket Surgeon
- 2,330
- 42
- 48
- Location
- North Georgia
check out recovry's sigsorry to burst bubbles here but is this true or just sarcasm?
i will probably never understand the true meaning of sarcasm lol
Chevytruck
Active member
- 1,579
- 2
- 38
- Location
- Western Maine
not that one
the one with the free vehicles
the one with the free vehicles
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Kenny is bein an arse.. Givin me a hard time about my intake, LED lighting, etc, etc, etc... because he's jelous... envious of my work... and only wishes I would take it up and ethnic notch or two when building my trucks... ya know... spiners... neon lighting... a La cocka Rocha horn (or however ya spell that)... etc... So in return I am giving his trucks away!!!not that one
the one with the free vehicles
Giving someones truck collection away only seems to be appropriate retaliation for such comments!!!
Ok... move along, nothing to see here... go find me some cab corners!!!
CCATLETT1984
New member
- 3,507
- 6
- 0
- Location
- Saint Clair Shores, MI
Dman, you have a pm with my address on the cab corners.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Let me translate for all you folks. Mike wants the sections at the A pillars towards the roof, not the corners behind the doors. Somebody must have a parts truck AND a sawzall.
CCATLETT1984
New member
- 3,507
- 6
- 0
- Location
- Saint Clair Shores, MI
Kenny, I already have them cut from the truck, and i used a chop saw
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Excellent Chris, thanks!
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Meh... Let's just say I lost my temper a few to many times today!!!!
Attachments
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Eh... it was worth not having to work from the underside...
